Welcome aboard. The factory service manual is available free in PDF format at the top of the page right below the header (service manuals"
Code 7 should be the temp sensor on the head right next to the spark plug. Is your fan on and temp light on as well?
Goober thanks for the reply!
I don’t have any clue on what’s going on but when I finished installing the clutch disc and installed the motor, the transmission was stuck in gear! I had to rock the atv back and forth to get it out and into neutral.
I am unfamiliar with these models but do you think the gear position indicator may be misdirected or gear indicator circuit incomplete? The fuel pump may not operate until an overriding ignition fault (for instance gear in neutral) is corrected.
do you have a service manual?
please bare with me as it’s my first time here and first post and hopefully and can get some answers or even a clue as of what’s going on with my atv!
problem is my fuel canister won’t turn when turning the key and sliding the on off switch to the start position, it’s a brand new OEM fuel pump and was working prior to me rebuilding the clutch. On the transmission light (amber) it blinks 7 short blinks. Anyone knows the code for that issue?
thanks in advance!