Jump to content

NickRose1453

Members
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Thanks! I will do as you say with I get home this evening but I already cleaned all 3 of the ground connections but I will do it again. I just replaced the Gear Position Switch with the OEM part and that didn’t help anything. I’m going to take the ignition switch apart and clean the terminals in there also.
  2. Battery connections are tight, brand new battery, checked all fuses for continuity, and getting power to ignition switch. Everything I changed since I’ve had it is OEM. I am skunked.
  3. I am working on a 2006 Honda Rancher 350 ES 2x4 TE model. When I got the bike it was stuck in gear because somebody tried using the manual shifter and sheared a gear off in the front cover that the gear motor goes into on the front of the engine. Well I changed that along with the angle sensor and put it back together and started it up and everything was working fine. After about 10 minutes she died out suddenly and I lost the neutral light. So I pulled the engine and replaced the gear position switch in the back cover of the engine thinking it would fix it because they are known for going bad, well that didn’t help and I even tried grounding the Lg/red wire in the back by the battery like others said to do and still not getting anything. What’s really weird is some days after it sits for a while I can go out there and turn the key on and the neutral light will be on but goes away after a few seconds or after you try to spin the engine over. Thanks in advance!
×
×
  • Create New...