Alohadiving

Thanks for the reply toodeep! yes I did pull the motor! Twice first time I forgot a washer over the drive clutch but it started right up. Then took it out and installed it the same day and now I have this problem!

Ok! Thanks

Jeepwm69! I do have an OEM temp/coolant sensor I’ll try to install it after work today. Also do I need to reset any thing to clear the flash code?

Hi jeepwm69 Thanks for the reply! the fan temp light is on and I have the fan unhooked at the moment! The 2 pin connector for the temp sensor broke off so I replaced it with an eBay one! Could that be the problem? I do have the repair manual on file but couldn’t locate the troubleshooting part for fi light codes.

Goober thanks for the reply! I don’t have any clue on what’s going on but when I finished installing the clutch disc and installed the motor, the transmission was stuck in gear! I had to rock the atv back and forth to get it out and into neutral.

Hi everyone! please bare with me as it’s my first time here and first post and hopefully and can get some answers or even a clue as of what’s going on with my atv! problem is my fuel canister won’t turn when turning the key and sliding the on off switch to the start position, it’s a brand new OEM fuel pump and was working prior to me rebuilding the clutch. On the transmission light (amber) it blinks 7 short blinks. Anyone knows the code for that issue? thanks in advance!