Jump to content
sgtelefson@gmail.com

discontinued fan control unit

Recommended Posts

I have a 1987 Honda trx350D. The fan control unit malfunctioned, discontinued and the only NOS is 400.00. The 1995-2006 TRX400fw has the same schematic as the 1987. The only difference I can see is the 87 has a 6 individual wire pigtail and the 95-06 uses 2 plug in connectors with a total of 6 wires. I want to modify my 87 atv harness from 6 individual wire pigtail to the 2 plug style. I can figure out the 2 wire connector is the thermal sensor, the 4 wire plug is another story, which wire goes to which terminal? Any Ideas?

Share this post


Link to post
Share on other sites
 
 

i'm all for oem, never would i '' jerry rig '' wires on my toys. if funds is an issue ?, then just install a fan bypass switch, be done with it.

  • Like 3

Share this post


Link to post
Share on other sites
 

By-Pass like Shade says is a good way to go -------  and you can take the by pass to the next level with a Summit fan controller , on my 95 300 I have two fans and the oil coolers  relocated , this little Gizmo controls which temp  the two fans kick on indepently , cost was $75 two years ago ,  made by David White out of Australia , sold by Summit Racing , and you don't have to cut into the existing harness ---- Retro makes a very nice fan controller from scratch  and Goober is his apprentice , I have one on my 450 , there is a nice thread on it here on the site  

image.png

  • Like 1

Share this post


Link to post
Share on other sites
 

I agree, OEM is the way to go and I am going to use an OEM fan control unit. Honda discontinued it and I don't trust used electronics. I'm trying to use what OEM still makes. Here are an 87 trx 350D and a 95-03 trx 400FW schematics, what is the difference, except the connectors? 

20211230_173306.jpg

20211230_173622.jpg

Share this post


Link to post
Share on other sites
 
 

If I could switch to the newer connectors then I could use this FCM.

Honda Fourtrax Foreman 350 D 87 Fan Control Unit 38710-ha7-671 31435

Good Usable Condition. Honda Fourtrax Foreman 350 D 87 Fan control unit 38710-HA7-671 31435 123.99 Product Details Manufacturer Part Number 38710-HA7-671 Shipping Our mission ...

Honda
 

Share this post


Link to post
Share on other sites
 
On 12/30/2021 at 4:39 PM, [email protected] said:
 

If I could switch to the newer connectors then I could use this FCM.

Honda Fourtrax Foreman 350 D 87 Fan Control Unit 38710-ha7-671 31435

Good Usable Condition. Honda Fourtrax Foreman 350 D 87 Fan control unit 38710-HA7-671 31435 123.99 Product Details Manufacturer Part Number 38710-HA7-671 Shipping Our mission ...

Honda
 

This is not a fan control unit; this is a fuel cutoff relay.

Share this post


Link to post
Share on other sites
 

Sorry about the repeat of this post but I had to change my email and display name.

 

I have a 1987 Honda trx350D. The fan control unit malfunctioned, discontinued and the only NOS is 400.00. The 1995-2006 TRX400fw has the same schematic as the 1987. The only difference I can see is the 87 has a 6 individual wire pigtail and the 95-06 uses 2 plug in connectors with a total of 6 wires. I want to modify my 87 atv harness from 6 individual wire pigtail to the 2 plug style. I can figure out the 2 wire connector is the thermal sensor, the 4 wire plug is another story, which wire goes to which terminal? Any Ideas?

I agree, OEM is the way to go and I am going to use an OEM fan control unit. Honda discontinued it and I don't trust used electronics. I'm trying to use what OEM still makes. Here are a 95-03 trx 400FW and an 87 trx 350D schematics, what is the difference, except the connectors? 

20211230_173306.jpg

20211230_173622.jpg

 

Share this post


Link to post
Share on other sites
 

Rocky Mountain atv shows all 86-89 TRX350A and D FCU are the same pn:

38710-HA7-671 supersede 38710-HA7-651

 

Here’s one from Power Sports Nation. 30-day warranty. The listing appears to have the wrong part number 36100-HA7-671 is the fuel cut relay 

 

Update Hay this listing seems wrong why is this coming up on my FCU search?

 

https://www.ebay.com/itm/Honda-Foreman-TRX-350-D-88-Fuel-relay-36100-HA7-671-30800-/363503984030?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0

Edited by Goober

Share this post


Link to post
Share on other sites
 

OK 350DD, took the front of my 450ES apart and took this pic of the fan control.  You should be able to see what wires go where on the 2 plugs.

Fan Control.jpg

 

Share this post


Link to post
Share on other sites
 
7 minutes ago, bcsman said:

OK 350DD, took the front of my 450ES apart and took this pic of the fan control.  You should be able to see what wires go where on the 2 plugs.

Fan Control.jpg

 

BCS , Looks like the light blue wire to your temp sensor has been repaired with spade connectors 

fullsizeoutput_f47.jpeg

Share this post


Link to post
Share on other sites
 

Yes fish when I installed a fan switch it was part of my mod......

Share this post


Link to post
Share on other sites
 
 
12 hours ago, 350DD said:

Thank you very much! I'll post the results.

Hope it helps, thankfully had the front end apart a few times and didn't take as long as first time.  Just have to remember where all the fasteners and bolts go....lol

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...