David0516 0 Posted July 10, 2022 It's getting fuel and spark, even with starter fluid it won't start any ideas? Share this post Link to post Share on other sites
shadetree 5,977 Posted July 11, 2022 1 hour ago, David0516 said: It's getting fuel and spark, even with starter fluid it won't start any ideas? answer: timing is off ?, or not enough compression from timing being off ?. 2 Share this post Link to post Share on other sites
jeepwm69 7,751 Posted July 11, 2022 If you have fuel and spark, as Shadetree said, it's either compression or timing. 1 Share this post Link to post Share on other sites
toodeep 1,760 Posted July 13, 2022 What year of machine do you have? What issues if any before the no start condition? Share this post Link to post Share on other sites
David0516 0 Posted July 14, 2022 22 hours ago, toodeep said: What year of machine do you have? What issues if any before the no start condition? It's a 2013 and no symptoms before this I'm going to try the timing this weekend like jeepwm69 and shadetree said Share this post Link to post Share on other sites
toodeep 1,760 Posted July 14, 2022 52 minutes ago, David0516 said: It's a 2013 and no symptoms before this I'm going to try the timing this weekend like jeepwm69 and shadetree said That year isn't as bad as the newer ones but I would still first check the fuel for moisture. Hook a line up to the fuel canister and cycle some into a clear jar. Between that and a spark plug which are the easiest, cheapest things to try then I would move on to the more complex issues. Share this post Link to post Share on other sites
David0516 0 Posted July 14, 2022 (edited) 9 minutes ago, toodeep said: That year isn't as bad as the newer ones but I would still first check the fuel for moisture. Hook a line up to the fuel canister and cycle some into a clear jar. Between that and a spark plug which are the easiest, cheapest things to try then I would move on to the more complex issues. I've already swapped out the gas and cleaned the tank out and put a new plug. I took apart the top end to check everything out from the inside and when I put it back together it started for maybe a quick 5 seconds but it was really boggy then died and after that just cranked but wouldn't start no more Edited July 14, 2022 by David0516 Share this post Link to post Share on other sites