BC-Buck 11 Posted August 12 Other day took bike out of a month of storage. When turning right would only turn about 1/2 way. Turn left ok so put on jacks with all tires off ground. In and out of 4X4 would act the same. Turns left good but when turning right sometimes would stop. All steering linkage looks good. When stops can rotate right tire a little bit and feel it mesh then turns correct. This is my busy season planting food plots so loaded on trailer and off to farm. Put 23 mile on bike with constant 180 degree turns while moving and worked like normal. Today wile barely moving turning right could get to where would not turn but roll1 to2" and feel it mesh and turn all the way. Thinking feels like CV joint but no noise . I rebooted about 5 years ago and looks good with no sign of leakage. Have any of you had a stock CV act like this? 2002 Rubicon 500 1800 hours. Share this post Link to post Share on other sites
jeepwm69 7,721 Posted August 12 Sounds like a bad CV to me. Share this post Link to post Share on other sites
BC-Buck 11 Posted August 25 On 8/12/2024 at 2:45 PM, jeepwm69 said: Sounds like a bad CV to me. I tried turning while moving slowly and can get to point where wear click, click. Will need to find new right axil. Share this post Link to post Share on other sites
