Jump to content
Louis

New member

Recommended Posts

Hey guys, I'm new to the forum. I'm needing some help troubleshooting a 2007 Honda rancher trx420fm. Any help is appreciated. It was running fine and suddenly it won't start. I'm not getting but 3.9 volts to my fuel pump and it won't prime. I've replaced the fuel pump, the fuel pump relay (twice), checked the bank angle sensor. Kill switch is good. Battery reads 12v. I've ran a straight wire to the fuel pump and it runs but still will not start. I've jumped the harness from several places and still nothing. I don't know what to try next

Edited by Louis

Share this post


Link to post
Share on other sites
 

Welcome to the forums Louis! Just a friendly suggestion. You may want to try starting a thread about the help needed in the proper section. It will get more foot traffic that way. If you would like any of the mods could split your intro thread into two seperate threads for you into the correct place.

Share this post


Link to post
Share on other sites
 

Welcome to the forum......first things first..12 volts will not get the job done...the battery is the first suspect?????

Share this post


Link to post
Share on other sites
 
 

Welcome to the forum. Any chance the FI light is flashing?

Share this post


Link to post
Share on other sites
 
3 hours ago, Louis said:

Hey guys, I'm new to the forum. I'm needing some help troubleshooting a 2007 Honda rancher trx420fm. Any help is appreciated. It was running fine and suddenly it won't start. I'm not getting but 3.9 volts to my fuel pump and it won't prime. I've replaced the fuel pump, the fuel pump relay (twice), checked the bank angle sensor. Kill switch is good. Battery reads 12v. I've ran a straight wire to the fuel pump and it runs but still will not start. I've jumped the harness from several places and still nothing. I don't know what to try next

 

3 hours ago, Derf40 said:

Welcome to the forum......first things first..12 volts will not get the job done...the battery is the first suspect?????

 

3 hours ago, SlammedRanger said:

Welcome to the forums Louis! Just a friendly suggestion. You may want to try starting a thread about the help needed in the proper section. It will get more foot traffic that way. If you would like any of the mods could split your intro thread into two seperate threads for you into the correct place.

Thanks for all the replies. Slammed ranger I appreciate that. Yes ,that would be good. I gotta get this figured out lol. Toodeep There are no flashing lights or any illuminated other than the neutral. Derf40 What do you mean 12v isn't enough? That's what size battery that I've always used on it, unless I'm missing something lol

Share this post


Link to post
Share on other sites
 

welcome louis, i see you made it over !, your in great hands here !.

  • Like 1

Share this post


Link to post
Share on other sites
 

Does anyone think it could be the voltage regulator?

Share this post


Link to post
Share on other sites
 
17 minutes ago, Louis said:

Does anyone think it could be the voltage regulator?

please make a thread in the utility section , this is a intro member thread only, thanks.

  • Like 1

Share this post


Link to post
Share on other sites
 
 
 
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...