chris22
Members-
Content Count
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Calendar
Everything posted by chris22
-
Thanks, when I put the new hoses and t valve on, I willd try to bleed them and maybe try that. Thanks again
-
Unfortunately no, haven't messed it in a couple days. I ordered the front hose assembly with T valve so waiting on it. Just have the feeling something is wrong in there. I seen some little pieces of rubber while bleeding. So I will change that out and try it again
-
Ok thanks, was wondering why it had vent lines. Learn something everyday
-
Yes, going to try that thanks. This model even has vent line that goes to a wheel cylinder on each side. Cant find a leak in them tho. Not sure why they have vent lines but would think that would only help get air out.
-
Thank you, worth a try. Hopefully I'll get chance today to try that or try it soon. Just odd if I pinch one side of the line, the lever feels good. Doesn't matter which side. But when both lines are free, the lever gets spongy.
-
Thanks, I've done both. Just odd if I pinch one side of the lines, either side, they feel good but when one side is released where both sides are free, the lever gets spongy! A pain in the butt. Hoping to mess with it later
-
Thank you very much! I'll give that a try tomorrow I hope. The thing is cracking me. For some reason I have a feeling something might be wrong at the T. Tomorrow I may try to bleed it from there. I didnt today because it was really tight and didnt want to strip it. Now I'm at the point if it does, I'll just buy a new one. Thinking of getting new hoses for the front even though I see no leaks. For the night because of what someone else mentioned, I strapped the break leaver down to handle bar and just let it sit overnight. Thanks for your help!
-
Hey guys, I got my daughters bike a 2005 400 Honda rancher. I put on 4 new wheel cylinders, new master cylinder and brake pads for the front brakes. Hubs were cleaned very well. The brakes were adjusted where they are rubbing, bleed the brakes a million times, manual and a vacum pump. The master cylinder is good, I pinched the line and it gets hard immediately. I bled from the bleeder valves, the Bango bolts on the hubs and even out the master cylinder bango bolt. If I pinch off one side of the line brakes get hard, either side. When neither line is pinched the brake handle still is soft. If I pump it up a bunch of times it gets hard but after I let it go, its soft again. I am out ideas! Does anyone have any ideals? I see no leaks anywhere, and all connections are tight. I dont know what to try or do. Thanks for any help. Chris