Coleworld
-
Content Count
5 -
Joined
-
Last visited
Posts posted by Coleworld
-
-
So I finally received my oem regulator and the situation is the same. As soon as I plug the red and green terminals in it blows the fuse. I tested the stator and it tested fine. I also noticed the neutral light won’t illuminate and it won’t try to start without the rectifier plugged in. Any advice?
-
No sir. I live in Nevada
-
1
-
-
The three wire pig tail that goes to the stator is unplugged. The fuse blows immediately. I attempted to jump the fuse and it’s pulling so many amps that the wire starts to burn
-
SpoilerI changed the regulator rectifier on my 300. Whenever I have the positive and negative leads to the rectifier plugged into the wiring harness it blows the 15 amp fuse. Even after I changed the rectifier it continues to blow the fuse. I’ve traced out the entire wiring harness and have found no shorts to ground. I’ve even removed the entire harness except the rectifier. The coil ground and the positive from the battery and still blowing fuse. Any ideas. I’m stumped
Regulator rectifier blowing fuses
in Electronics
Posted
It’s a 1997 Honda trx fw 300