M_goerler

Anyone got an oem part number for the drive shaft rear main seal where the drive shaft connects to the motor

They won't spin cause rear is still on ground

It's a 2006 honda rancher 350 fe and I just ordered an oem master cylinder from honda for it so now just waiting on it

Replaced brakes and master cylinder bleed brakes and master cylinder even tried using a vacuum pump any ideas? Did replace the master cylinder with an Amazon one that they said fit it I don't know any ideas?

It's very hard to turn and tires kinda slid wind you turning not a very tight turn radius

Yes it's full

Do they have limited slip on front or rear mine won't slip at all even going around turns makes it hard to turn

OK thanks for the help I fixed it valves were way out of adjustments runs great now and starts fine

Yeah I'll check that when I get home just now getting off work lol

It's got a battery but only showing 12.5 volts with key on

Could the battery just not have the cranking amps for the starter I know I tried a jump box but them things barely start a car

Not that I know of it don't look like it I know he said he changed the starter once and it didn't fix the problem and I changed it a again thinking he might have gotten a bad one does it have a throw out gear for startor?

It's a new starter old one was doing the same thing

2003 honda rincon 650 won't trun over with starter can't pull start too hard to pull sounds like I'm pulling against starter replace the cam it was bad and still can't get engine to start with starter but if you keep hitting the start button in will turn over sooner or later any ideas it did it before I change the cam thought it was decompression vales but I'm stuck now

Might be this cam let me know what you think

Hey I think is this cam tell me what you think?

So I think the cam is the problem but can't get head bolts out to check it any ideas???

I'll try that this weekend I'm going to check the coil and see if exhaust is clogged too I'm stumped on this one now

I thought might be the cam issue read about but is got 140 psi compresssion

Yes I have looks fine but going to replace anyway

Checked carb and cleaned but it back fires out carb and won't rev past half but idles great and easy to start any ideas?

Cowboys theme colors and stickers made this as an xmass present to my 2 boys 8 and 10 they love it had to fix and repair all plastics witout 20231229_170535_1.mp4

Akatv does great work look at my before and after pictures

Well I sent my display to Contact AKATV omg he does a great job sent it to him on Monday from nc to ak it made it there on Wednesday and now he's done with it Wednesday night and sending it back great job well done and worth it can't thank him enough!!!! Here's pics before and after!!!

How do you contact him?