Hondaforeman93

Timing shouldn’t be off , all I did was change the carb and like I said it ran fine before I changed it. 
 

i don’t have any but I thought about getting some , heard it was bad for an engine though, and wouldn’t have putting gas down the spark plug hole have the same outcome ? 
 

it’s a very confusing situation , sorry lol

Screen is broke but there’s not very many on the bike , has good compression . And when I roll it over it backfires once in awhile , and plug seems dry 

Already tried pouring gas in the plug hole , and tried the carb trick, nothing happened. Choke works but just won’t start, when I remove the air filter and roll the bike over gas vapour comes out of the carb on the intake side

 

as far as I know , it has fuel, spark, and electrical is fine . 

I mentioned in my first post it has a new spark plug and also has spark 🙂

 

plug isn’t Fouling and looks to be clean.

 

and when I put my old carb back on it should’ve started back up but it’s not . It just rolls over. Carb is clean , it leaks a bit of fuel but it should still start. It ran before I removed the old carb.

thank you very much ! Finally glad to have some help! 
 

Carb was original since bike was new, was leaking gas through the choke primer and other places , so I bought a carb off of amazon.

 

i also put the old original carb back on, but now it won’t even start with that one , just rolls over . 

Hello and thank you for having me on the forums !

 

i have a 2004 Honda foreman es, 

Bike was running, changed carb for a brand new one started right up and than died. Will roll over but will not start.

 

new spark plug, has spark.

fuel filter is clean

gas is on with new gas in it

vent line clear

gas lines clear

kill switch in middle on left handle bar 

it’s in neutral

gas is turned on

 

I have exhausted my options on what to do, I have no idea !!! Please help,