Dastevoe
Members-
Content Count
9 -
Joined
-
Last visited
Community Reputation
2 Neutral-
Thanks ever so much, great explanation. Steve
-
Thanks. What does DCT stand for. Steve
-
Seems it was the motor !! I got it back together thanks to the great link shared above. It shifts as it should now. Thanks for all the assistance Steve
-
Well I put the sensor on and still just "clicks" trying to shift. Pulled the front shift motor & cleaned gearing (looked good not really gummed up), added light weight lithium grease. Now I've created another problem (as per usual when I tear stuff apart),when removing shift motor I mistakenly took out the socket head screws as well as the hex heads and when I pulled on the motor disengaged the stator (?) and now have to figure out how to reassemble. How can I keep the brushes in place when sliding stator back in ?? YIKES !! BTW..... the shop has a policy of no electrical returns so that's why I put it on anyway. Package wasn't even opened 🤬 Also as far as clutch adjustment there is no adjusting screw, shift valve body is where adjuster should/would be. Am I missing something ? Steve
-
Thanks, just picked up the angle sensor and haven't installed yet. Can't seem to find the clutch adjustment nut. Going to check out link you posted Thanks
-
No blinking lights, shows "N" but just "clicks" at transmission as it tries to shift into gear. If I slowly roll the machine and shift it will pop into gear with engine off or running. Steve
-
Battery load test was good + full charge. Have not adjusted clutch. I ordered an O.E.M. angle sensor But will look up how to adjust clutch before installing sensor. Steve
-
-
Hey guys, I have a 2009 TRX420ES with 1500kms on it and it has recently developed a shifting issue. When I try to shift from N to 1st all it does is "click" at the transmission as it is trying to go into gear. It will shift into reverse but not up. If I feather the throttle and try to shift at the same time sometimes it will engage and can drive normally (or so I think). Is this a angle sensor issue ? Thanks Steve
-
Thanks for the add, looking fwd to being a member. Steve