Jump to content
Krypto313

Is there an alternative product for METER ASSY., COMBINATION 37200-HN5-M11

Recommended Posts

Welcome to the forum!

I am still repairing these, if you would like to contact me for a repair I will send my contact information to your message box

-AKATV 

 

Share this post


Link to post
Share on other sites
 
 

Welcome to the forum!

I am still repairing these, if you would like to contact me for a repair I will send my contact information to your message box

-AKATV 

Share this post


Link to post
Share on other sites
 

@AKATV

do you think you could repair? Hard to tell in the picture but it seems like one of the films has just absolutely failed and crinkled up. I think I can still somewhat make out a number looking closely at it. 

 

image.jpeg

Share this post


Link to post
Share on other sites
 

WELCOME TO THE FORUM !

Pretty sure I can help you out, I’ve seen better and I’ve seen worse
I’ll send my contact information to your message box -in the meantime, you might want to pull that top cover off so we can get a closer look

-AKATV

Share this post


Link to post
Share on other sites
 

Just joined this forum. I have a 2004 Rancher TRX350FE- bought it used a few months ago and have been learning how to work on it.  The display was working fine when I got it, the screen was scratched but fairly clear initially.  Recently, it's gotten a ton worse and now display has big blacked out spot in the middle. I took it apart and noticed the gasket was loose and there was some moisture inside so presumably that moisture is what caused this. Been hunting for replacement part and came across this forum.  @AKATV Is this fixable and if not, does anyone know where to find a replacement part for the display? 

IMG_2596.jpg

IMG_2595.jpg

IMG_2594.jpg

IMG_2598.jpg

Share this post


Link to post
Share on other sites
 

Welcome to the forum

It looks like some really bad UV/sun damage to your polarization films. It could possibly be internal LCD damage, kind of hard to tell until I get my hands on it.

I’m sure we can get it sorted out and repaired

for you

I will send my direct contact information to your message box as well

-AKATV 

Share this post


Link to post
Share on other sites
 

I have a 2004 rancher 400 without gps I can’t read anything on the screen, even with headlights on and backlit still nothing @AKATV could you help me out with this?

Share this post


Link to post
Share on other sites
 

Welcome to the forum!

If you can post a picture with your headlights turned on so that the display is illuminated I can better see what repairs you need

I will send my contact information to your message box

-AKATV 

Share this post


Link to post
Share on other sites
 

I have a 2001 honda foreman 450 s and the display does not work.  It has the lights for neutral and reverse however the display is blank.  Can anyone point me to a person that can repair this?

Share this post


Link to post
Share on other sites
 

Welcome to the forum
I responded to your separate direct message with my contact information

It would help to post a few pictures of what you have going on to get a better idea of what repairs you need

YOU MIGHT WANT TO REMOVE THAT TOP COVER SO WE CAN SEE IF YOUR CIRCUIT CARD HAS ANY DAMAGES AND WHAT REPAIRS YOU NEED TO THE LCD DISPLAY

-AKATV

Share this post


Link to post
Share on other sites
 

Same issue with 2006 Rancher 350 ES meter. LCD screen is difficult to read.  Are you still in the business of repairing these meters?

Share this post


Link to post
Share on other sites
 

Welcome to the forum!

Yes, I am still repairing speedometer for the time being. I’ll send my contact information to your message box if you’d like to look into a repair.

-AKATV

Share this post


Link to post
Share on other sites
 

I am new to this forum.  I have the same question as others:  Is there an aftermarket alternative to discontinued meter displays?  Based on the responses in this query:

 

This message is to @ AKATV.  I am working on a 2005 Honda Rancher 400 AT (TRX400FAA in 4x4 non-GPS configuration; screen display P/N 37200-HN7-003).  My meter display was half full of water (broken lens; original owner thinks it spent about 6+ months that way) and I drained it, then let it dry in the sun for 3 days.  Inside the meter, I did find several electronic components that had corroded off...see photo) I repaired the large crack in the lens using silicone sealant.  Some of the ATV's electrical issues were resolved with this (mainly, motor would not turn "off" when ignition key was turned to "off").  However, the instrument display itself does not work.  The backlight can be seen when the headlights are turned "on", so it is getting power.  Still a few electrical issues (neutral light stays on when shifting into any gear) and I have already determined that the neutral switch indicator and slide shaft system are working correctly.  Neutral light does get dimmer when shifting into "drive" or "reverse."  Do you think this is something that AKATV can repair?  Please provide contact info.  Thank you.

Meter Internal Parts found.jpg

Meter w_Ignition & Headlights ON.jpg

Share this post


Link to post
Share on other sites
 

Welcome to the forum

There really is no alternate meter solution for the rancher 400AT it is pretty much a one of a kind

Unfortunately, extreme water damage like this is not repairable and the circuit card assembly must be replaced

Do you have any pictures of the assembly with the top cover removed?

What shape is the internal LCD in?, Its hard to tell with the cover on

I will send my contact information to your message box as well

-AKATV

Edited by AKATV

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...