[email protected] 1 Posted May 20, 2023 I'm having a hard time figuring out the cause of my pioneer shutting off. In neutral, it continues to run but the display cycles the lights and icons like it does at startup except it's doing it every minute or so without me turning the key. However, if I'm in drive, the engine will shut off as the disply cycles. It happens after just a few seconds of driving. In the past, it was much more random but now it's constantly doing it. I've changed the main ground wire, installed a new start switch, changed the spark plugs, even switched out a new ECU.. nothing has fixed it yet. Could there be a sensor somewhere that would do this? Also, it won't stay in MT mode anymore. It swithes itself back to automatic mode and shuts off when it shifts to 2nd. Any help is appreciated! I'll try to attach a video of the display. 20230519_202006.mp4 Share this post Link to post Share on other sites
jeepwm69 7,719 Posted May 22, 2023 Welcome aboard. Obviously losing power intermittantly, but the question is where. I'd check your fuse box connections and make sure they are clean and that the fuses are making good connections with the wires on both sides. Share this post Link to post Share on other sites
[email protected] 1 Posted May 26, 2023 I replaced the fuel pump and now it runs fine. I guess the pump was barely supplying enough fuel before. It would somehow catch back up between shutoffs and keep running sometimes.. so far, it's running fine with the new fuel pump. It hasn't missed a lick yet. Before, I could only go a few feet before shutoff. 1 Share this post Link to post Share on other sites
jeepwm69 7,719 Posted May 26, 2023 Glad you got it fixed. Thanks for posting back up with the solution, will likely help someone else out who has the same problem in the future. Share this post Link to post Share on other sites