Kingquiet13 0 Posted May 20 I’m just curious if anyone would be able to help. I have a 1986 200sx with a bad top end. Piston snapped, as well as bad gouging in the cylinder. I have a 1987 trx250 top end and was wondering if this would mount up and be able to run on the 200sx case. They are currently at 2 different locations and would rather not waste the time to get one or the other if they aren’t able to be combined. Share this post Link to post Share on other sites
Fishfiles 19,750 Posted May 20 Welcome to the forum King' , I have had multiples of the 200SX and the 250 Fourtrax and I have never heard of the combination of parts you mentioned , personally I doubt it would work , cause I think I would have heard about it --- but , you never know ----- I know you can put 250 jug and head on a 300 G+H Discount ATV , will set you up with a new jug , piston and everything you need to do an upper job for $249 new or for a little less they will bore your jug and send new piston and everything else ---- they have done a 200SX form me Share this post Link to post Share on other sites
