thegman 0 Posted August 9 TRX450S 2001 Hi, This would suddenly pull to the right, especially if turning to the right. I'm a bigger guy and it can still yank it hard. Very scary. I replaced the wheel bearing. no change, the replaced upper, lower ball joints no change. Next replaced the CV axle. Still the problem remains. I noticed theres play in the front axle and bearing, it seems excessive or is it normal? Any suggestions to the cause would be helpful Share this post Link to post Share on other sites
jeepwm69 7,233 Posted August 10 Welcome aboard. If you have a bad bearing I'd replace that. You could have put a bad bearing in (chinese garbage) or you might have a worn knuckle that won't hold a bearing anymore. Did the bearing press in easily or was it hard to push into the knuckle? Also check your a-arm bushings. Share this post Link to post Share on other sites
