hamp363 0 Posted May 5 What is the best way to check for spark on these machines Share this post Link to post Share on other sites
shadetree 5,914 Posted May 6 3 hours ago, hamp363 said: What is the best way to check for spark on these machines you can test the reg/rec, ohm the stator and pickup coil, ohm the spark plug coil. there is no way to test the c.d.i. other than with a known working c.d.i. . MAKE SURE YOU HAVE A NUETRAL LIGHT ON THE DASH ?~!..IF NO LIGHT ?..NO SPARK !. Share this post Link to post Share on other sites
hamp363 0 Posted May 6 Thanks for the reply. I have a neutral light. I have replaced everything that you had listed except the stator. Checked the stator and was within the specs. I am out of ideas. I know the machine had sat for a period of time. Is there anything that I am over looking. Oh, also replaced the kill switch. Same result Share this post Link to post Share on other sites
jeepwm69 7,638 Posted May 6 26 minutes ago, hamp363 said: Thanks for the reply. I have a neutral light. I have replaced everything that you had listed except the stator. Checked the stator and was within the specs. I am out of ideas. I know the machine had sat for a period of time. Is there anything that I am over looking. Oh, also replaced the kill switch. Same result Use OEM parts or chinese amazon/ebay stuff? If you're using anything but OEM parts, first thing to do is put your original parts back on to start troubleshooting. 2 Share this post Link to post Share on other sites
shadetree 5,914 Posted May 6 4 hours ago, hamp363 said: Thanks for the reply. I have a neutral light. I have replaced everything that you had listed except the stator. Checked the stator and was within the specs. I am out of ideas. I know the machine had sat for a period of time. Is there anything that I am over looking. Oh, also replaced the kill switch. Same result how did you test the c.d.i. ?, as i said...THERE IS NO TEST, OTHER THAN REPLACING WITH A KNOWN WORKING C.D.I. FROM ANOTHER ATV OF SAID MAKE/MODEL !. now...you can try tapping on c.d.i. while cranking it, while watching for spark at plug. Share this post Link to post Share on other sites
hamp363 0 Posted May 6 I put a new cdi on the machine. Share this post Link to post Share on other sites
jeepwm69 7,638 Posted May 6 43 minutes ago, hamp363 said: I put a new cdi on the machine. OEM? All the other parts OEM? Share this post Link to post Share on other sites
hamp363 0 Posted May 6 Roger that. I have the manual. I guess I will go through the connections again. Share this post Link to post Share on other sites
shadetree 5,914 Posted May 7 4 hours ago, hamp363 said: I put a new cdi on the machine. where did you buy the c.d.i. from ?. Share this post Link to post Share on other sites
shadetree 5,914 Posted May 7 1 hour ago, hamp363 said: Local Honda shop ok..then you got other ele issues going on..reg/rec ?, spark plug coil ?, kill switch ?. run these test again. Share this post Link to post Share on other sites