ATVmarc 1 Posted April 6, 2021 What’s the trick to removing the black plastic cover attached to the circuitboard, to get to the LCD screen? mine won’t budge, and I feel like I’m going to break the circuitboard trying to open it. might have to hire your services to repair my LCD screen if I can’t open up this case. thanks! Share this post Link to post Share on other sites
Fishfiles 20,147 Posted April 6, 2021 Welcome to ATVHonda , @AKATV is the guy that knows 2 Share this post Link to post Share on other sites
AKATV 839 Posted April 6, 2021 Hi What make and model circuit board/speedometer? Can you post a picture or two so we can see what you have going on? Generally-if you have undone the twist tabs on back or removed the 6 screws, the black plastic display bezel is just set onto the circuit board with 2-4 clear plastic pins that go thru holes in circuit board It should lift up with gentle pressure or very light prying, if stuck try to lift both sides equally or you will break off the pins 1 Share this post Link to post Share on other sites
ATVmarc 1 Posted April 6, 2021 Ahh, the twist tabs! I thought those were for the display underneath. I twisted them and am now able to pop off the plastic cover. Thanks!!! 1 Share this post Link to post Share on other sites
bcsman 1,404 Posted April 6, 2021 Yep @AKATV is the guy to get info about the speedo combos for sure..... Share this post Link to post Share on other sites
AKATV 839 Posted April 6, 2021 2 hours ago, ATVmarc said: Ahh, the twist tabs! I thought those were for the display underneath. I twisted them and am now able to pop off the plastic cover. Thanks!!! You’re welcome, glad to help that’s what makes this forum great Let me know if you need any other help or have any questions AKATV Share this post Link to post Share on other sites