f.burns 0 Posted September 13, 2021 Broke 4x4 in my full time four wheel drive honda trx350. pulled the front end apart, diff and cvs are in good nic. The spline coming off the motor appears good and so does the front prop shaft. When i push the shaft into the the spline it does not engage , which is why i have no 4x4. when i pull the shaft back toward the diff about 10mm , it engages. I noticed that there was a spring in the prop shaft when i pulled it out , it was broken. would this be why i have no 4wd ? IMG_2847.MOV Share this post Link to post Share on other sites
Fishfiles 20,147 Posted September 13, 2021 hi welcome to the forum ----- also check the spines of the drive shaft and collars #6 and #7 , riding with the spring broken may have let the drive shaft move and stripped the spines Share this post Link to post Share on other sites
jeepwm69 7,751 Posted September 13, 2021 Welcome aboard. As Fish said, check your splines. Likely you have a stripped coupler. Not uncommon the front drivelines on these things. Share this post Link to post Share on other sites
