Snaggletooth 2 Posted April 8, 2022 (edited) I have a '98 Foreman 450 that is missing its voltage regulator. My problem is that whoever took it cut the plug off also. I have another plug but I'm at a loss with these three identical yellow wires. Is there a way I can tell what order they should go in or am I out of luck here? I could always play the guessing game, but I'd rather not if I can help it. Edited April 8, 2022 by Snaggletooth Share this post Link to post Share on other sites
Fishfiles 20,147 Posted April 8, 2022 They are called Y1. Y2, Y3 on the wiring diagram https://drive.google.com/drive/folders/15eWwngQ5SdlsIfbgpm5ZJWJYBYx3vJ7s 3 Share this post Link to post Share on other sites
Snaggletooth 2 Posted April 8, 2022 Appreciate it. I see they all go to the alternator, so does it not matter what position they go to on the plug then? I'm trying not to burn up anything, if that's even something I need to worry about here. Share this post Link to post Share on other sites
shadetree 5,969 Posted April 8, 2022 47 minutes ago, Snaggletooth said: Appreciate it. I see they all go to the alternator, so does it not matter what position they go to on the plug then? I'm trying not to burn up anything, if that's even something I need to worry about here. it does not matter which yellow wire goes to each other yellow wire, all go to stator. if in doubt ?, buy another wire harness, otherwise, wire them up..run it. 2 Share this post Link to post Share on other sites
Goober 1,555 Posted April 8, 2022 Which harness is cut? The stator subharness or the main? Sub might be easier to scavenge from another stator but the main might be harder to find Share this post Link to post Share on other sites
shadetree 5,969 Posted April 9, 2022 2 hours ago, Goober said: Which harness is cut? The stator subharness or the main? Sub might be easier to scavenge from another stator but the main might be harder to find reg/rec is on main harness. Share this post Link to post Share on other sites
Snaggletooth 2 Posted April 9, 2022 Thanks for the help, I've got it all connected again and I'm on to troubleshooting the rest of it. 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted April 9, 2022 25 minutes ago, Snaggletooth said: Thanks for the help, I've got it all connected again and I'm on to troubleshooting the rest of it. I see your from the Sportsman's Paradise , what part ? ------ I am in Lacombe ! ---- I knew a guy named Leroy Brown , use to call people snaggletooth Share this post Link to post Share on other sites
Snaggletooth 2 Posted April 9, 2022 9 minutes ago, Fishfiles said: I see your from the Sportsman's Paradise , what part ? ------ I am in Lacombe ! ---- I knew a guy named Leroy Brown , use to call people snaggletooth I'm up around Alexandria. Doesn't ring any bells on my end. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted April 9, 2022 3 minutes ago, Snaggletooth said: I'm up around Alexandria. Doesn't ring any bells on my end. i use to hunt in Dry Prong / Catahoula , just north of Alex Share this post Link to post Share on other sites
Snaggletooth 2 Posted April 9, 2022 Oh yeah, nice. Yeah not far off. I haven't been up to Catahoula in a few years now. Closest I've been to Lacombe is along I10. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted April 9, 2022 I think I would solder them wires and not use butt connectors ------ You got the Foot Shift or ES Foreman ? Share this post Link to post Share on other sites
Snaggletooth 2 Posted April 9, 2022 54 minutes ago, Fishfiles said: I think I would solder them wires and not use butt connectors ------ You got the Foot Shift or ES Foreman ? I'll be going back over everything once I get it to spark again so I'll probably do that then. It's a foot shift. 1 Share this post Link to post Share on other sites