Texastbone 8 Posted January 12 Just scored a set of 27" wheels tires with 4x110 bolt pattern, I am curious if they will work on my stock bike. They are off a IRS bike and i understand spacers are in order, I have had my foreman since it was new and don't want to alter anything...She's a classic!!! Any help would be great Thanks Tbone out Share this post Link to post Share on other sites
jeepwm69 7,725 Posted January 18 What machine are the wheels originally from? Normally it would take 2” spacers on the rear if they are Honda or Yamaha IRS wheels. You’ll be ok with 27’s. Might be in 1st in the thick stuff. If you need lower gearing it’s easy with a 450. A TRX300FW primary gear and clutch basket is a bolt in 14.5% reduction Share this post Link to post Share on other sites
Texastbone 8 Posted January 18 Thanks for the reply, They came off a CFMOTO of some sort, I went to the property today and bolted them up, No issues with the fronts, The rears are in need of spacers, I ordered 2" spacers..thanks for the input!! Left one hits the exhaust. Im hoping the spacers will work out Thanks again Tbone out!! Share this post Link to post Share on other sites
