M_goerler 8 Posted March 22 So I think the cam is the problem but can't get head bolts out to check it any ideas??? Share this post Link to post Share on other sites
shadetree 5,884 Posted March 22 4 hours ago, M_goerler said: So I think the cam is the problem but can't get head bolts out to check it any ideas??? if you are worried about stripping the bolts out ?..or worse..snapping them off ?..grab yourself a hammer impact driver, 1/2 is best, slap a socket on it, use a hammer while twisting , smack it loose, this works well for stuck bolts as well as stuck nuts. 1 Share this post Link to post Share on other sites
M_goerler 8 Posted March 22 Quote Hey I think is this cam tell me what you think? Share this post Link to post Share on other sites
shadetree 5,884 Posted March 22 5 hours ago, M_goerler said: Hey I think is this cam tell me what you think? if you are asking if the cam is ok ?, i can't tell by this pic ^^. but i can tell you, left side is lobe side, right side is bottom of cam lobe, not where the rockers ride. Share this post Link to post Share on other sites
toodeep 1,758 Posted March 23 The followers (lifters) will show more wear (if any) than the camshaft. Are the head bolts tight, seem stripped, rounded heads. If your that far there should only be 4 bolts, 6mm thread with 8mm head for socket. If the heads are rounded it might be a pain to get them broke loose with the motor in the frame. Share this post Link to post Share on other sites