honda4ever 0 Posted Thursday at 11:53 PM I have a 2006 TRX 500 f e Foreman. It was running fine cut it off when it started back I have no fire. When it does this I noticed that the electric shift button will not work either nor will the four-wheel drive switch I have took the plastic off unplugged all the electrical connectors and put dialectical Grease I have changed the voltage regulator and still have nothing. Has anyone had this same problem before if so what was the fix? Share this post Link to post Share on other sites
jeepwm69 7,744 Posted 8 hours ago The 4wd doesn't work without the machine running, so that's one less worry for you. Will it turn over, but no spark, or does it not even turn over? This will sound stupid, but first thing check your kill switch on the left handlebar. You'd be surprised at how many people bump that switch off center and then get no start. If that's centered, you'll have to go through bit by bit to test. I'm not the electrical guru here, that would be @retro and @Melatv, but I can get you started. Strong green neutral light/ N on the display? Have you tried starting with right brake lever pulled? Did you put an OEM voltage regulator on, or did you put an aftermarket unit on it? If you put aftermarket on it, put the OEM unit back on. Share this post Link to post Share on other sites