_Wilson_™ 6,567 Posted October 27, 2022 On October 25, 2022 at 12:42 PM, Fishfiles said: That's one wicked looking critter..... And, Check out the leaf springs on the front..... I'm curious as to how it rides..... With those springs and no shocks. 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted October 30, 2022 finally finish fabricating the front and rear fenders. Started with a front and rear Yamaha motorcycle fender. Last problem to solve is that it idles high and I have not figured out yet , how to get it to idle down any more. It has a carb upgrade that was supplied as a motor upgrade from the engine supplier 3 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted October 30, 2022 (edited) I gather you've already contacted the engine supplyer..... On that high idol issue ? Seems like if they supplied it as an up grade they would have done the research to make sure it was a good match.... Edited October 30, 2022 by _Wilson_™ Share this post Link to post Share on other sites
Fishfiles 20,145 Posted October 30, 2022 6 hours ago, _Wilson_™ said: I gather you've already contacted the engine supplyer..... On that high idol issue ? Seems like if they supplied it as an up grade they would have done the research to make sure it was a good match.... Bikeberry supplied the engine kit , which came with the stock carb and twist throttle and a second carb , never contacted them about the idol issue , but every time I contacted them on the many other issues I encountered along the way , they were no help ---- my guess is the air intake tube could be a problem by leaking or restricting air , or the throttle cable length isn't right and it won't let it return all the way or maybe the stock head ---- got to remember this is 100% China junk This is the engine kit I have pictured below , you can see it comes with two carbs , one carb is on the engine the other in the pic , the upgrade carb is a bigger carb ------- I couldn't use the high performance head in the pic with out doing some cutting and machine work to it , as it hit the frame , the pic shows the high performance head on the engine and another one in the pic , I have a totally different stock head on the engine that is not pictured 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted November 7, 2022 1916 Triumph Model H 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted November 8, 2022 Like if I did not have enough projects , I am thinking seriously about buying this bike , and putting a engine on it , Why , I am asking myself the same thing I like the drum brakes front and back and heavy duty spoke rims 2 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted November 12, 2022 Pioneer of the field Share this post Link to post Share on other sites
Fishfiles 20,145 Posted November 14, 2022 Sugar Bear >>> chopper front end designer/builder 1 Share this post Link to post Share on other sites