Pete L. 5 Posted October 11, 2020 Hi there. D1, D2, ESP Flashing and only have first gear. Reverse has like a rev limiter. If I turn the key on, start it and right away put it in D and get on the throttle right away, I have all the gears. As soon as i come to a stop, it goes back into flashing the D1, D2, and ESP. Does someone have manuals for troubleshooting this? Share this post Link to post Share on other sites
toodeep 1,760 Posted October 16, 2020 Is there a pause in the flashing or is it constant? On the top menu bar you should be able to find a link to a manual. 1 Share this post Link to post Share on other sites
Pete L. 5 Posted October 16, 2020 Hi there. It ended up being the cam shift angle sensor. It was flashing 5 times and then a longer flash. Found a manual on this forum and it lead me to that. Installed a new one and all issues fixed. Now I need some new rubber for the wheels and it’s ready to go!! 2 1 Share this post Link to post Share on other sites
toodeep 1,760 Posted October 17, 2020 Did you reinitialize it after replacing the sensor? It would be probably close without but going through that procedure makes sure everything in the system is working together. Share this post Link to post Share on other sites
Pete L. 5 Posted October 17, 2020 No I didn’t. I also watched a video on utube and installed it how the guy said. installed it with the connection facing approximately 1 o’clock and the rotated it till the two holes line up. Tested it in D1, D2, and ESP. It worked great and shifted good through all the gears. The reverse rev limiter issue went away as well. Maybe I got really lucky. I didn’t look deep enough into the manual. What’s the process for initializing it? Share this post Link to post Share on other sites