-
Content Count
35 -
Joined
-
Last visited
Posts posted by 99450ES
-
-
5 hours ago, jeepwm69 said:How that's nuts! Looks like they're the same for the 400 Foreman, 400 Rancher, 350 Rancher, and early 500 Rubicons, as well as the 450.
Here's one attached to a plastic guard for $9 shipped
Yep the little bracket is the same, guard probably not but I dont need that. Nice find and thank you for the link, I just ordered one!
-
17 minutes ago, Fishfiles said:Those OEM guards give very little protection to the axle boots , I see so many atvs with one side knocked off , they are junk >>>>> you would do better buying or making some stick stoppers out of steel that are held on with U-bolts
Gotcha, I was just putting all the factory pieces back together is all. I may look into some more broad/protective guards at some point.
-
-
-
2 hours ago, BIGDAWG7110 said:Does anybody know the difference between the dash cover between a 2001 450es and a 450s. The part numbers are different but the parts diagram looks exact and any pictures I can find they look the same. It's just a cover over the electronics. Are they really different? The price difference is substantial. I am having my dash fixed and the cover is cracked but a new cover specific to that year is $160 or more. Crazy.
I just went through this on mine a few months back. The differences are soooo minor on all these display covers, its pretty annoying. I made one from a 2001 ES fit my 1999 ES with just a few changes to my base plate. Id say just order the one for your model and not risk it. I guarantee there will be some small difference in them, unless you want to try to make it work. I spent like $190(I agree with you on price, crazy) on mine but it is really nice having it all look like new again after I had AKATV fix the LCD screen as well.
-
2 minutes ago, shadetree said:ok, will have to wait until i get back in town some time later next week, going to the deer woods, we'll get the shipping info and cost lined out, you pay for the cover and shipping i have no idea what this will be for shipping ?, but i'll sell the cover for 20 bucks . ( the old faded cover ), sound good ?. do not post the info in this thread, we'll handle it in pm.
Works for me, shoot me a pm once your back and we can get it figured out. Thanks!
-
32 minutes ago, shadetree said:do you want the brand new cover ( star burst yellow ) or the old side cover that is a faded yellow ?.
The used one preferably. Hate to have one bright piece that is new and doesn't match.
- 1
-
On 10/29/2022 at 8:42 PM, shadetree said:update: well..got the dreaded phone call from rmatv ( a month later ! ) that the front fender is no longer being made from honda !..not sure how this pan's out after i spoke to a rep from honda motor corp ?..lady told me back then most parts were still being made ?..yeah..what ever lady !!..lol. had to speak to the gal ( give her the bad news she was not getting her fav color..sigh )..she choose to go with red..and even that color may not be around for some of the body parts ??..sigh. anyway..had all plastics changed to red now...we'll see how this pans out in a few weeks ?, yes..i said few weeks..as the front fender is also on back order..which tells me..it may too be discontinued today ?..man..this project is killing me !. and i know dang well..IT'S CUZZ THIS MF STARTED OUT YELLOW !!!..lol. i've said it b4..i'll say it again...YELLOW DOES NOT LIKE ME !..THAT GOES BOTH WAYS..ROFL,
Dont forget about me on that yellow side cover on the right side! If you want to sell it let me know, Thanks Shadetree!
-
Make offer or trade.
-
I have front and rear bumpers(Kimpex?) for sale that came off my 1999 450es. I have the mounting u-bolts for the front bumper, I don't have them for the rear. These are in good condition and have been Line-X'd(bed liner) with a couple scrapes through the coating but no metal damage. $150 for them both. Im located in Gloucester/Williamsburg/West Point area of Va. As far as shipping goes, I would have to get quoted. If there are any other photos you would like just ask. Thanks for looking! GONE!! Thanks!
- 1
-
16 minutes ago, _Wilson_™ said:Transmission and transfercase ??
2005 4l80e with a 1989 3/4 ton suburban transfer case(passenger drop 241c) with electronic speed sensor. Transfer case is fairly difficult to find.
- 1
-
6" lift on 33x15.50 swamper sx's. 16.5x12 weld super singles. 6.0 is .030 over with forged flat tops, gen 4 rods, and 862(5.3) heads. BTR Truck Norris cam, morel lifters, BTR pushrods and trunion upgrade. Stock 4l80e for the moment. 14 bolt ff rear with 10 bolt front with 4.10 gears. It's a fun truck.
- 5
-
-
Welcome! Im new here also, its nice to come to a forum that has people willing to help and share experience like these guys do.
- 2
-
56 minutes ago, Zonnen said:Thanks, @99450ES. We are working through a number of things with this machine. The display is one of many on the list, but definitely needed. Lol. It's been a mess. Got the oil leaks resolved at least!
Nice! I'm picking away at mine as well. Always something to mess with if you look hard enough lol.
-
6 minutes ago, Zonnen said:Hi @AKATV - I've got a 2000 TRX450ES with non-working display that I'm hoping you can help with. The display turns on, but nothing shows up. Unable to shift the unit. Is this one that you can possibly rebuild? Its surprisingly clean inside. Thanks for your insight!
Welcome! You have another issue if you are unable to shift through the gears. You can ride them without the display plugged in.
-
25 minutes ago, _Wilson_™ said:It's just me I'd go to $150. Or $125.
Works for me, I'll prolly clean them up and post for sale here in a day or so then.
- 1
-
10 minutes ago, Mac102004 said:Always used to be around the $75-100 a piece mark, not really a big ticket item. They are a decent bumper though.
Nice, so $100 for the pair would be fairly priced?
-
28 minutes ago, Mac102004 said:Definitely kimpex bumpers
Thanks for the info, any idea what a fair market value is on them? Not sure if it's ok to ask that but I'd want it to be fair for both parties, I'm not trying to gouge a buyer. They aren't bent, and are professionally bedlinered, not spray can stuff. Have a few scratches in the coating but overall great shape.
-
1 hour ago, mikeythesasquatch: said:heck yeah man , that’s cool . We do group rides around our property and a few others around our place . Look up hartwood mud and trail riders on Facebook. Based out of va . Good bunch of guys . Send a friend request to the group and maybe get you on one of the local rides
Sounds good man! I appreciate that.
-
Welcome, Im in Va as well.
-
45 minutes ago, _Wilson_™ said:Glad to help, my guess is they won't be there long, for the right price, both look like there is great condition!
Yea, that would be my next thing....price haha. No clue what I should price them at.
- 1
-
6 hours ago, _Wilson_™ said:you have front and back both ?? I'd offer them here 1st (IF ? I chose to sell them ) you might get a better price that way, lets just say if i was going to sell anything atv, I'd list it here 1st.
Right here >>> https://atvhonda.com/forum/20-for-sale-trade-wanted/
Yep I have both of them, they are together in the 2 pics of them on the ground. Sounds good, I'll post them in the for sale/trade/wanted section when I decide on it. Thanks Wilson!
- 1
-
8 minutes ago, _Wilson_™ said:Np glad to help. if it's not a kempix, I'd hunt up @Mac102004 bet he could shine some light on this subject.
Sweet, I dont think I'm going to use them and may offer them up for sale, just have decided 100% yet.
Foreman 450 front arm guard bracket
in For Sale - Trade - Wanted
Posted
I like it lol. I was planning on something similar if I couldn't find something reasonable. I appreciate the ideas fellas.