SparkyMark 49 Posted May 23, 2021 I did a search on here to see if anyone else had posted on this subject but found nothing. Has anyone replaced their stock bulbs with LED equivalents? All my stock bulbs work - but I've wondered if there would be any benefit in using LEDs. I certainly noticed the difference on my Subaru. Front 12v 30/30w x2 (34901-GT4-003) (These need to have Low/Hi beams) Assist 12v 45w (34901-HN2-000) Tail 12v 5w x2 (34351-657-921) 2004 Honda TRX450FM A Foreman S Share this post Link to post Share on other sites
SparkyMark 49 Posted May 24, 2021 With a little help from my new found friends on here, we found LED equivalents (model specific) : Front 12v 30/30w x2 (34901-GT4-003) >>>https://www.ebay.com/itm/324397402756?hash=item4b87978a84:g:ZY0AAOSw6HdfxJFL (hi/low beam) Assist 12v 45w (34901-HN2-000) >>>https://www.ebay.com/itm/1836...abffc2071:g:lckAAOSwcs1cHJJ- Tail 12v 5w x2 (34351-657-921) >>>https://www.ebay.com/itm/3534...24c936182:g:XN4AAOSwsYNghuwx The power of combined and diverse years of ATV experience - atvhonda.com rocks. 2004 Honda TRX450FM A Foreman S 3 Share this post Link to post Share on other sites
slowindown 494 Posted May 24, 2021 (edited) Let us know how the headlight bulbs work without a heat sink, which your linked headlight bulbs don't have. Tech may be better now. But when I experimented with hi/low LEDs for my 06 yamaha rhino several years ago, I found was that the bulbs without the heat sink were not actually very bright. To look at them head on, they seemed to be bright but that was just an illusion caused by the whiter color of the leds. To drive around at night, they were very near useless. But when I got some leds with a heat sink and a fan and they were awesome. The 06 rhino had an oddball bulb and I had to take two old rhino bulbs and dremel out the ring and install it on the leds so they would fit the housing. In the end, they worked great. There are some out now with a heat sink but without a fan that a lot of can am people use with good luck. For tail lights, non heat sinked bulbs were all that were required for me. Edited May 24, 2021 by slowindown Share this post Link to post Share on other sites
SparkyMark 49 Posted May 24, 2021 Still considering and researching at moment - including your experiences 🙂 And you're right - the tech improves each year. Share this post Link to post Share on other sites
slowindown 494 Posted May 24, 2021 (edited) Beamtech is the fanless brand I’ve seen on can am forums. Edited May 24, 2021 by slowindown Share this post Link to post Share on other sites
SeekanDestroy 24 Posted May 24, 2021 I ordered some off ebay should be here around June 1 so I will keep you guys updated on how they work. Share this post Link to post Share on other sites
SparkyMark 49 Posted May 24, 2021 3 hours ago, SeekanDestroy said: I ordered some off ebay should be here around June 1 so I will keep you guys updated on how they work. Yes - please let me know how you get on SD. Share this post Link to post Share on other sites
