Endpoint18o5 0 Posted September 29, 2021 I was gifted a 2000 honda 350 es but couldnt get it to shift with es. Manually works good. Bought a manual amd stafted trouble shooting. Its says woth ognition off test the black with green strip at main pin connector on ecu. Ypu should get 11v or better. So tested ot amd got 0. Read wire diagram amd power to thag circuit is only on when ignotion key is on. Then i do get 12.50. So i bought an angle sensor and put that in for stake of hoping it was the issue. Now bought new ecu and still nothing. Should i change speed sensor? Or is there a way to jumper that black w green strip wire to complete the circuit. Couldnt get a test light to light up at all looking for a grounding issue. Any help would be great. Thanks Share this post Link to post Share on other sites
jeepwm69 7,413 Posted September 29, 2021 Welcome aboard. @Melatv and @retro are the electrical gurus on here when it comes to the ES machines. I just converted my kid's to footshift. LOL Share this post Link to post Share on other sites
Rooster 2 Posted October 4, 2021 I have 2000 Honda 350 es I had trouble before this time I took the sifting are put it in gear turn the key on and put it back in neutral, This time it was a plug in front came unplugged some. Share this post Link to post Share on other sites