Hawaiianboy 0 Posted November 10, 2021 Hi everyone! I’m new here on the forum and some help would be greatly appreciated. Ive got a 2006 350 rancher ES 4x4 My electric shift wasn’t working for a while, so I have been doing it manually. I’ve been doing a lot of research that leads to dead ends (discontinued meter for my bike) I’ve heard that the member AKATV fixes meters! AMEN!!! not sure if you’d be willing to take on my project of a meter? one morning a month ago I tuned on my bike started it right up like normal and heard a POP from my dashboard/display then followed by smoke and electric burn smell. I’m guessing it shorted out. I unplugged the gray connector to the meter and it still runs fine (only manual shifting) but id really appreciate if someone could help fix my discontinued meter lol thanks! Share this post Link to post Share on other sites
jeepwm69 7,719 Posted November 10, 2021 @AKATV should be able to fix you up. Welcome to the forum. Check out this 350 upgrade thread, and also check out @retro's creamsicle orange 350 Disc brakes from the 07-13 420 Ranchers will bolt on at the ball joints. You'll need calilpers, hub/rotor assemblies, and knuckles. 1 Share this post Link to post Share on other sites
AKATV 839 Posted November 10, 2021 Hi Hawaiianboy and welcome to atvhonda.com! I am sure I can get you fixed up, sounds like your board might be toasted, but it you might have just had a capacitor blow If you can open up the speedometer cases and and send a picture or two of the corcuit card, we can take it form there You might want to check you harness for rubbing, shorting etc.. as well as you dont want to repair it, only to have it happen again I have sent my contact information to you as well AKATV Share this post Link to post Share on other sites