Rjohn   4 Posted February 3, 2022 Was given a half disassembled 07 Honda rancher 400cc, just about have it back together but iam struggling on the simplest thing. not sure if missing parts or its me 😂. Can't figure the proper position of the oem air intake pipe, and no I don't want a snorkel. Just want to arrange it the proper way. Note I know the way it is now is wrong I just did my best Share this post Link to post Share on other sites
AKATV   850 Posted February 3, 2022 (edited)  This picture might give you a better idea-see the first 2 pictures Also, you can download the service manual here https://drive.google.com/drive/folders/1bE0Q49DVddje37NxEAD1QDj5R9HmtSSs  Edited February 3, 2022 by AKATV Share this post Link to post Share on other sites
Rjohn   4 Posted February 3, 2022 4 minutes ago, AKATV said: This might give you a better idea Also you can download the service manual here https://drive.google.com/drive/folders/1bE0Q49DVddje37NxEAD1QDj5R9HmtSSs The images won't open.. I do have the manual but the picture doesn't really show how the pipe fits in place around other engine components Share this post Link to post Share on other sites
AKATV   850 Posted February 3, 2022 The end you have fitted to the airbox is correct, you need to route it down from the upper fuel tank area into the airbox. The upper air chamber rests just in front or the fuel tank area and there is a clip to fasten it in in place, thats what the hole is for by the air chamber see the first two pictures on page 6-25 of the manual if the image posted here wont open Share this post Link to post Share on other sites
toodeep   1,760 Posted February 4, 2022 You will have to remove or take loose the green plastic over the fuel tank to slide it in place. Share this post Link to post Share on other sites
Rjohn   4 Posted February 4, 2022 Appreciate the help I got it today! super simple but my brain wasn't cooperating Share this post Link to post Share on other sites
