99450ES 28 Posted June 21, 2023 (edited) Edited June 21, 2023 by 99450ES Share this post Link to post Share on other sites
Fishfiles 20,148 Posted June 21, 2023 Those OEM guards give very little protection to the axle boots , I see so many atvs with one side knocked off , they are junk >>>>> you would do better buying or making some stick stoppers out of steel that are held on with U-bolts 2 Share this post Link to post Share on other sites
99450ES 28 Posted June 21, 2023 17 minutes ago, Fishfiles said: Those OEM guards give very little protection to the axle boots , I see so many atvs with one side knocked off , they are junk >>>>> you would do better buying or making some stick stoppers out of steel that are held on with U-bolts Gotcha, I was just putting all the factory pieces back together is all. I may look into some more broad/protective guards at some point. Share this post Link to post Share on other sites
Fishfiles 20,148 Posted June 21, 2023 30 minutes ago, 99450ES said: Hello everyone! Im looking for #3 on this diagram. I will fabricate one if needed but figured Id see if anyone had a good 1 or 2 laying around. Parts stores want almost $50 for this little strip of metal. Thats kinda crazy. >>>>>>> Gotcha, I was just putting all the factory pieces back together is all. I may look into some more broad/protective guards at some point. Most of the OEM guards I seen are plastic not metal , think that is why they are always broken off Share this post Link to post Share on other sites