87Iroc 344 Posted August 19, 2020 3 minutes ago, Misterclean said: I'm very happy you got the kinks worked out! See if an aftermarket fuel screw is available. I know on high performance four stroke dirt bikes the after market came up with two different ones. One was just a very long screw that could be access by hand but still a little tight. Another was a screw that had a cable attached with a knob on the end. The knob was secured to one of the float bowl screws if i remember correctly. You could just turn the knob for fine tuning......it was easy. Thanks for the tip. My friend said a Suzuki he is working on has that. I'll check it out. 1 Share this post Link to post Share on other sites
87Iroc 344 Posted August 21, 2020 (edited) Where’s this go?. Skimmed factory manual didn’t see it in chassis section. Off to parts trees but figured I’d ask here while I searched Edited August 21, 2020 by 87Iroc Share this post Link to post Share on other sites
87Iroc 344 Posted August 21, 2020 Under front of tank? 2 Share this post Link to post Share on other sites
shadetree 5,884 Posted August 21, 2020 1 hour ago, 87Iroc said: Under front of tank? ----> https://www.partzilla.com/catalog/honda/atv/1998/trx450s-a-fourtrax-forman-s/fuel-tank . you can clearly see where it goes around the down tubes, then push pins on each side of the heat shield. 1 Share this post Link to post Share on other sites
87Iroc 344 Posted August 21, 2020 52 minutes ago, shadetree said: ----> https://www.partzilla.com/catalog/honda/atv/1998/trx450s-a-fourtrax-forman-s/fuel-tank . you can clearly see where it goes around the down tubes, then push pins on each side of the heat shield. got it. Thanks! 1 Share this post Link to post Share on other sites