Jump to content
We have a winner! Congrats Wheeler!! ×

AKATV

Members
 View Profile  See their activity

  • Content Count

    1,584

  • Joined

  • Last visited

  • Days Won

    8

Posts posted by AKATV

  2. Posted

    Are you saying you put it all back together with the original parts?
    If you have it all back together with the original parts and the shift motor is trying to shift but not shifting electronically, but it shifts fine manually using the tool, you might want to check the magnets inside the shift motor they get cracked sometimes or the glue comes loose and they will make weak attempts to shift

    make sure you have a good strong battery as well

    As far as the no gear indicator on your speedometer post a picture, most likely it needs to be reprogrammed

    Does your speedometer read speed properly?
    -AKATV

  3. Posted

    The pictures sure to help a lot

    I can tell you with 100% certainty that your LCD has failed internally and It is not repairable.

    I might be able to source some parts for you

    or you might be able to pick up Shadetrees whole assembly (new) if he still has it available

    I will send my contact information to your message box as well

    -AKATV

     

     

    • Like 2
    • Thanks 1

  6. Posted

    MAR1949 sent a picture to me

    Meter stays in neutral with "N" being displayed for all gears

    Having him check gear position switch as per manual

    He also informed me he has a bypass kit on his  Rancher 350 (ES)

    I have not run a bypass kit- so wanted to ask members what/how gears are displayed on meter when using one?

    I know that half the gears are hard wire generated from the gear position switch and the other half

    are determined by angle sensor/ECU which are unlplugged when using bypass kit

    But either way, it should not be showing neutral for every gear

    Other possibility is that the shift drum has cracked off on the end or bad gear position switch which he said he just replaced

    so maybe the gear position switch pin was not aligned with the "N" on switch during  but either way it would not just stay in Neutral

    -AKATV

     

  7. Posted

    Welcome to the forum!

    Post a picture of the display issue if you can

    If the gear shift position indicator is missing,

    it will need to be reprogrammed 

    If gear indicator is present on LCD, but not displaying the gears properly, it could be a cracked shift drum or faulty gear position switch

    I will send my contact info to your message box as well

    -AKATV 

     

  13. Posted

    Thanks for the pictures
    The first one definitely has UV/Sun damage to the LCD display that I can most likely repair. The second one has internal LCD damage is not repairable.

    If you’d like to contact me for a repair, I’ll send my contact information to your message box

    -AKATV

  21. Posted · Edited by AKATV

    Thanks for the pictures. It’s hard to tell with the top cover on if you have an LCD failure or just need your polarization films and backlight filter replaced on the LCD.

    The foreman 450 S models are quite prone to having an internal LCD failure that causes a big black splotch that you can’t see through

    It’s non-repairable and the whole LCD assembly needs to be replaced
    It might help to remove the top cover to get a better look, as you would have to do that to send me the circuit card and display anyways 

    -AKATV

  24. Posted

    Welcome to the forum!

    I do a lot of repairs on these

    Post a picture or two of what you have going on and I might be able to tell you more

    I will send my contact information to your message box as well

    -AKATV

  25. Posted · Edited by AKATV

    Welcome to the forum!

    I do repairs on these I will send my contact information to your message box if you are interested

    in looking into a repair

    -AKATV

    • Thanks 1
×
×
  • Create New...