not shifting

[[email protected] 1]

I have A 2012 Foreman 500.  after i ride for awhile it stops shifting and i have to get back in any gear it's in to get back.  after it sits awhile it will shift again  code 24

[ATC4ever 1,084]

This machine is an ES model is it?

[jeepwm69 7,719]

19 hours ago, [email protected] said:

I have A 2012 Foreman 500.  after i ride for awhile it stops shifting and i have to get back in any gear it's in to get back.  after it sits awhile it will shift again  code 24

 

Welcome aboard.  If you want to change your username to something other than your email (to keep a little OPSEC) let me know and I can change it.

 

If you go to the top of the page in the toolbar, there is a button labeled "service manuals".  If you download the factory service manual for your machine (free) you can look up error codes and the manual also offers troubleshooting instructions.

 

For a 2012, 24 error code is shift control motor drive circuit.

 

So looking at the manual go to section 23-20 and it tells you how to troubleshoot.  Now that being said, if you follow the instructions and the problem isn't found, THAT is where the guys here can usually add some other instructions to try. 

 

 

Honda Foreman 500 service manual 2012 error codes.pdf

[[email protected] 1]

Yes it it an electric shift

[ATC4ever 1,084]

I would take a guess the motor brushes are worn out, or something related to it.

[[email protected] 1]

How do I fix that

[[email protected] 1]

I get 14.4 volts when running 

[ATC4ever 1,084]

The shift motor. Do you know how to remove the shift motor & check the brushes? There are manuals on here.

[[email protected] 1]

Yes

[[email protected] 1]

I have to get to the 4 wheeler it's 70 miles away

[[email protected] 1]

Changed shift motor now code 22 what is going on

[ATC4ever 1,084]

Did you happen to remove the angle sensor? I wonder was the machine in N when you installed the shift motor or was it stuck in gear? It may have to be lined up. I would also check the connections to make sure they are clean & getting good contact.

[[email protected] 1]

Not sure if it was in N when I changed the motor 

[[email protected] 1]

If not how do I change that

[Fishfiles 20,147]

https://drive.google.com/drive/folders/1vG2Up48bgvpVgopy-jLg5p1AKUWQnypf

[jeepwm69 7,719]

Code 22 is still related to the shift motor.  If you follow that link Fishfiles posted, you can download the factory service manual (free, I might add).

 

Go to section 23-18 and it will give you detailed instructions on how to find the culprit of your error code.

[[email protected] 1]

Thank you the 4 wheeler will be home this weekend or next I will look at that section 

[[email protected] 1]

I think the shift motor is not in square 

[shadetree 5,969]

2 hours ago, [email protected] said:

I think the shift motor is not in square 

be sure to inspect the shift motor's magnets ?..they are prone to break. be warned !!!..be very careful how you take the shift motor apart ?..its a pain to put back together if you are not watching how it comes apart ?!..lol.

[[email protected] 1]

Thank you for all the help. Removed shift motor and reinstall it must have been off center.  Thank you again