TBRider

1 hour ago, Fishfiles said:

 

 

I wonder if you could cut the oil tube between the head and side cover , install a tee and then either one or the other , run a tube for a mini gauge or install a low pressure switch and run a wire to a light --- knowing what oil pressure it is running would be cool ------  wonder  what is the OEM spec for oil pressure 

If you know of a shop that can crimp the ends on hydraulic hoses I'm sure it can be done, might be how I fix my busted hose.....

Welcome to the site

Got another 6-8"s of snow last night, no more plowing snow, the banks are to high, need the snowblower to move it now....

Give carbonate a try wheeler, you can get it from hotsy in either Calgary or Edmonton, it comes in a 5 gal pail, should be under 100 bucks, it will clean the mud out of the bedliner also. Great for bugs on the windshield in summer also.

Welcome to the site

-20C here this morning, supposed to warm up for a few days as a storm comes this way, sunny and nice but the wind coming from the north still has a bite to it....

You should be able to adjust your unloader to drop your pressure to be able to use it, you just can't adjust the flow,GPM of the pump.

More snow again here this morning, got the replacement hose off the parts bike but got pulled away to work on the neighbors blower on his tractor. Hopefully I can get that swaped out and running again, I like plowing snow more than snowblowing....

The high school kids made a snowman?

Welcome to the site

I have a 17 rubi and I like it, had the money at the time to buy it new, glad I did, nice thing is there are now some aftermarket stuff available to change out the electric 4x4 and a plug and play O2 delete, thats I think 25 bucks, if you can afford one get it...

Foot of snow here if not a bit more, blew an oil cooler line on the quad 10 feet from the garage door, snowblower time,but a beautiful afternoon sitting at 3C

7 hours ago, Melatv said:

 

Hate to say this but --Ted Cruz was born in Alberta Canada.😞

Shush, Canada is embarrassed he was born here......

Sorry for your loss.

Yup, and its all nice maple, drying there for years, I started going there 5 years ago....lol

1 hour ago, LedFTed said:

out of curiosity; can you mimic the way the smaller dish is pointing? an is there still a phone apt., that shows the satellite position?

used to be an apt., a decade ago, roundabout..

Yes you can point the big dish at the same sat and use the lnb. The phone apps are really only good for locating the sat and swing if you have a clear line of sight for signal.

4 hours ago, ATC4ever said:

All that wood i cut up last summer has been gone or a few weeks now.. been burning some stuff i cut about 2 months ago, chopping it very small & drying it on the stove  😬 

I have a better idea how much i will need next winter.

I'm going out to the beaver dams and getting mine there.....lol

Ran out a few weeks ago here too....

Nice, wish I had one here...

If you have a small mig you can do 2 different things, put it on low voltage and just slowly build up a sealed weld, or if you have a similar piece of scrap you can cut strips and cover the gap and weld all around. You can focus more of your heat on the patch doing it this way.

Its always nice cutting it in the snow, don't have to worry about sawing dirt....

How much is left? Got a picture?

Welcome to the site

I liked the range of the old curve, it had a full watt of output.

17 minutes ago, Tim-ANC said:

Still waiting for a new BlackBerry

I'm still honestly using my Z30 works the same as day 1..

9 minutes ago, Fishfiles said:

 

 

tomorrow it's going to be grilled chicken legs

Are those front legs, or the bigger hind legs....