Andre125m 0 Posted February 25, 2020 Hey shadetree hope all is well. I watched the YouTube video again and I guess he was using gear oil to lubricant the chain since its in closed. Question what should I use to keep the chain lubricated ? Thanks Share this post Link to post Share on other sites
shadetree 5,969 Posted February 25, 2020 1 hour ago, Andre125m said: Hey shadetree hope all is well. I watched the YouTube video again and I guess he was using gear oil to lubricant the chain since its in closed. Question what should I use to keep the chain lubricated ? Thanks gear oil works good, thick, sticks well. 80w-90 gear oil. Share this post Link to post Share on other sites
Andre125m 0 Posted February 25, 2020 Hey there Sr. question how much do i used? and should i clean out the area first and then apply? Thanks Share this post Link to post Share on other sites
jeepwm69 7,719 Posted February 25, 2020 Factory chain should be o-ring style. https://www.motosport.com/blog/o-ring-chain-vs-non-o-ring Share this post Link to post Share on other sites
retro 4,071 Posted February 25, 2020 What are you working on? Share this post Link to post Share on other sites
Andre125m 0 Posted February 25, 2020 hi guys nothing at the moment i just brought a 1984 125m and wanted to do some maintenance on it. so i saw a youtube video and he was putting oil into the chain housing. Thanks Share this post Link to post Share on other sites
shadetree 5,969 Posted February 27, 2020 On 2/25/2020 at 10:23 AM, jeepwm69 said: Factory chain should be o-ring style. https://www.motosport.com/blog/o-ring-chain-vs-non-o-ring never seen an o-ring chain on atcs of this model ?. o-ring chains were very common on motorcycles and motocross , but not this model atc that I know of ?. i'm gonna look this up, and see what was sold on it way back then ?, I might not find anything though. Share this post Link to post Share on other sites
toodeep 1,759 Posted February 27, 2020 Continuous oring chains was common on a lot of the older 3 wheelers. I've broke a lot of them in the past and they was usually replaced with the cheaper non oring chain. Either chain inwould use chain lube on it. A can will last a long time and most are formulated to not attract particles as bad (dirt). That chain case isn't really sealed. I've came across some filled with grease in the past as well. You want to talk about a mess to clean out. Share this post Link to post Share on other sites
shadetree 5,969 Posted February 27, 2020 8 hours ago, toodeep said: Continuous oring chains was common on a lot of the older 3 wheelers. I've broke a lot of them in the past and they was usually replaced with the cheaper non oring chain. Either chain inwould use chain lube on it. A can will last a long time and most are formulated to not attract particles as bad (dirt). That chain case isn't really sealed. I've came across some filled with grease in the past as well. You want to talk about a mess to clean out. and what a pain those cases were to take off !!..lol. if the chain came off inside ?, your gonna have fun getting it back on with the cases in the way !..lol. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted February 27, 2020 Welcome to the forum ---- One thing I learned when running bikes with chains , is keep up on the adjustment ---- don't know about your 125M , but some models will eat a hole in the crankcase if the chain is ridden loose ---- some models have after market case protectors available 1 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted February 27, 2020 [auote]some models will eat a hole in the crankcase if the chain is ridden loose[/quote] ^^^^^Came accross a that a fews times at little Johnny's. Share this post Link to post Share on other sites
jeepwm69 7,719 Posted February 27, 2020 15 hours ago, shadetree said: never seen an o-ring chain on atcs of this model ?. o-ring chains were very common on motorcycles and motocross , but not this model atc that I know of ?. i'm gonna look this up, and see what was sold on it way back then ?, I might not find anything though. I haven't done any work on the TRX125's I've picked up yet, but did some nosing around online doing research on them. Looks like these used Oring chains, but most of the replacement chains are non-oring. https://www.partzilla.com/catalog/honda/atv/1985/trx125-a-fourtrax-125/rear-wheel-axle-chain-case Share this post Link to post Share on other sites