Melatv

3 hours ago, freebo86 said:

What’s the front crankcase cover torque specs? Manual shows no torque values for the 13 bolts. 
 

 

Hi: See picture for your torque

Hi: Big Welcome Here

Rain hard last night with very strong winds -- everything this morning is frozen hard as a rock.

Hi: Big Welcome Here

Hi: If you touch the throttle when starting the bike --- it will shut down and the bike will time out for a short time before you can start again. safety feature so the bike will not take off if in gear.

Hi: This is the boot I wear in the winter when out doors for long period of time. 

https://www.cabelas.ca/product/97983/cabelas-mens-inferno-2000-gram-camo-boots

Hi: Big Welcome Here

Hi: Big Welcome Here

So sorry hear of the lost of your Grandson -- reading all of the article was a feeling that I will hold on too.

On 2/20/2021 at 9:47 AM, Fishfiles said:

 

What's this "WE" stuff , didn't know the Ka'nooks were in on the Mars mission !!!!   hehehehe

 

My buddy works for the film industry , heard they are filming the Mars surface videos for TV viewing in Algiers, La .  ,  LOL 

Hate to say this but --Ted Cruz was born in Alberta Canada.😞

9 hours ago, freebo86 said:

Now the question is how do I weld this back together.. the muffler is quite thin material. Last time I borrowed gas to connect to my welder from a dude but don’t feel like doing it again..

any idea if those jb weld style pastes or whatever they are could work? 

 

Get some brazing rods and use a hand torch

Hi: Big Welcome Here

Hi: When it's saying 1 3/8 that is the difference between the front and back center of the tires --- 35" center of front tires -- so 35 - 13/8"  -- the center of the back of the front tires would be 33.68"

So that is my drawing above which I posted some place else  -- have the correct air pressure in them -- Place the board at axle height with the board touching each side of the rear tire -- if want the toe out adjust the tie rods so you measure 13/16" from the front tire edge to the board.

Hi: Big Welcome Here

Hi: We got all ice pellets and freezing rain -- just a mess

Hi: Big Welcome Here

Forget this

Hi: Big Welcome Here --- Start with letting us know about your bike -- full ID ---- Make -- Year -- if TRX??? 

Hi: Mess here today

Hi: Big Welcome Here

Here is a picture of the panels -- the Isolating switch is in the Generator Panel -- that isolates the generator panel from the Main panel when power is lost -- Main panel is always connected to Hydro at all times. -- There is a cable running from the Generator Panel to a receptacle on the outside of house to plug the Generator in when needed.

I use a 5000 watt generator -- I (myself) installed a 60 amp generator panel with a isolating switch that isolates it from the main 200 amp panel -- everything I need is in the generator panel --well pump -- fridge -- deep freeze -- lights ---- one flip of the isolating switch and start the generator wait for hydro to come back on. Also changed all  lights over to led lights.

Here is what I have

Hi: In 2014 Honda started replacing the angle sensor with a Hall Effect angle sensor -- you can't test it using a meter -- you need to test it by applying 5 VDC to it.

Hi: Big Welcome Here