Melatv

Hi: If you have a test meter -- disconnect the 4wd switch and check the switch for continuity -- 

42 minutes ago, Mr. Brian said:

Found all the paperwork and you're right. We got it in 2010 but it is a 2009 year model.

Where is the actuator that puts it in and out of 4WD? 

The 10th digit is a 9

Hi: In the service Manual go to section 16  pages 25, 27, 29  (front final clutch)

Hi: Big Welcome Here

Flies it dies -- brown it's down -- black goes down too

Here is how I  mounted my Kolpin  gun boot  -- straight up draw 

You said they set the valves -- they had to take the fuel tank off -- the fuel line maybe kinked when they put the tank back on -- seen this done before -- 

Hi: Big Welcome Here

That is a good size to have for camping -- nice a light to carry -- 

Hi: What are you going to use it for?

Hi: Big Welcome Here (both of you) have fun -- be safe

Hi: Check the fuel line going down to the sub fuel tank -- maybe a kink in the rubber hose.

Hi: Drill a hole through the 8mm x 1.25 bolt and silver solder or braze it to match the fitting you are using for the gauge. 

Pull start on a TRX420 will not start the bike if the battery is dead or disconnected -- so carry a booster pack.

No I don't have the time of day to mess with anyone.

Hi: Does the engine speed increase when you give it a little throttle?

Service manual

https://drive.google.com/drive/folders/12hzs10L_Gwu0aVyp8vhmEXNdf2N2P7tk

Hi: How did you check the oil level in bike?

Hi: Big Welcome Here --- Have you got a gasket on the clutch cover?

1 hour ago, Glenda said:

HARROWSMITH ONT CANADA

I lived in New Toronto for 4 years (1962)  -- worked at ECA

Hi: That is great news you found the problem -- have fun -- be safe --- where do you live?

Hi: If you have a meter to test with unplug the D1 D2 connector 

In the D1 position you should have continuity on all 3 wires O + Bu/Bl + Bl/G

In  the D2 position you should have continuity on Bu/Bl + Bl/G only also O + G  only

The gear position was that a new or used?

Hi: Is the gear indicator on the display flashing a code? or is it shown N

Hi: Big Welcome Here

13 minutes ago, Glenda said:

THIS SENSOR IS ON THE BACK OF MOTOR NEAR BOTTOM  THEY CALL IT SWITCH ASSY CHANGE

Hi: Big Welcome Here ---- This may help --- Wrong Picture 

Hi: Big Welcome Here

Hi: Big Welcome Here