Mac102004 425 Posted January 5, 2020 I have a bunch of parts here to put together a 350D top end on a 300 engine. It is not complete, you will need gaskets, both pistons either need the crowns machined down or spacers used on the base of the cylinder to let the valves clear the piston. HD valve springs and hardened rocker arms would be a good idea. This setup was fired up as a 350cc engine but never broke in or used. Would like to sell all as a package. Price includes shipping. Includes: 350D Reverse grind cam, sprocket, cam chain 350D Crank Machined for 300 flywheel 350D head, believe it needs at least one new exhaust stud 350D STD Bore cylinder with Wiseco 10.25:1 High Comp piston (350cc) 350D cylinder with XR500 sleeve and 90mm Wiseco XR500 Piston (433cc) 300FW crankcase that has been bored for the XR500 sleeve, opened up to approx 98-99mm. As stated this is NOT turnkey, this is a builders kit, you figure out the rest. Price includes shipping, is negotiable, and is in US funds. Not interested in trades. 3 Share this post Link to post Share on other sites
retro 3,984 Posted January 6, 2020 Looks like a fun project Mac. How much are you asking for it? Share this post Link to post Share on other sites
Wheeler 2,502 Posted January 6, 2020 (edited) Seen it on FB for $1750 I believe... Edited January 6, 2020 by Wheeler 1 Share this post Link to post Share on other sites
Mac102004 425 Posted January 6, 2020 Wheeler is correct. 1750usd obo 1 Share this post Link to post Share on other sites
jeepwm69 7,420 Posted January 6, 2020 Trade for an 85 Grand Am with a blown head gasket? 2 2 Share this post Link to post Share on other sites
Mac102004 425 Posted February 1, 2020 Reduced to $1250 USD 1 Share this post Link to post Share on other sites
Mac102004 425 Posted February 27, 2020 Alright posted as a package before and never had much luck, willing to part out. Honda TRX350D Cylinder head and rocker cover. One of the exhaust studs needs repaired. Stock rockers and valve springs. $225 Honda TRX350D Cylinder with STD Bore Wiseco 10.25:1 High Compresson Piston. engine was started once then piston was removed, has some marks from slight valve interference. Mint otherwise. $200 Honda TRX350D Cylinder with XR500 Sleeve and 90mm XR500 Wiseco piston which is unmodified. Assembled but never ran. $400 Honda TRX350D "Reverse Grind" Camshaft. Do not know specs on it. Started once then removed. Will include sprocket and chain. $250 Honda TRX350D Crankshaft, machined to fit 300 flywheel. Good condition. $300 Honda TRX300FW Engine Cases, machined to about 90mm for much larger cylinder sleeves. Like the XR500 Above. $250 All prices are in US Funds, shipping at your expense. Or pick up in Nova Scotia Canada. 1 Share this post Link to post Share on other sites
toodeep 1,746 Posted February 27, 2020 @Mac102004 are you on the honda hoarders FB? I would try posting there if you are (I don't remember seeing it if you did), a lot of those guys like to do some custom stuff. 1 Share this post Link to post Share on other sites
Mac102004 425 Posted February 27, 2020 2 minutes ago, toodeep said: @Mac102004 are you on the honda hoarders FB? I would try posting there if you are (I don't remember seeing it if you did), a lot of those guys like to do some custom stuff. yeah Roy I'm a member but I never posted it there. I posted it on the 300 club page that was it. Share this post Link to post Share on other sites
toodeep 1,746 Posted February 27, 2020 Some of those guy's/gal's I think are single and working for ????, money sometimes doesn't seem to be an issue. I would give it a try, nothing to loose. 1 Share this post Link to post Share on other sites
milleratc24 1 Posted October 24, 2022 On 2/1/2020 at 7:10 AM, Mac102004 said: Reduced to $1250 USD How can I contact you Share this post Link to post Share on other sites
_Wilson_™ 6,500 Posted October 24, 2022 Hi, Miller, welcome to the forums @Mac102004 he's been busy, i recon......he should be along... You've only posted one time..... You have to get a certain number of post before you can PM (private message) a member or you can type this @ then choose the members handle from the list that pops up, and they will be notified. @Mac102004 1 Share this post Link to post Share on other sites
milleratc24 1 Posted October 31, 2022 Thank you @_Wilson_™ I'm building a motor for my big red @Mac102004 1 Share this post Link to post Share on other sites
Mac102004 425 Posted December 4, 2022 Sold all this stuff awhile back ended up just putting it on ebay. 1 Share this post Link to post Share on other sites
