-
Content Count
5,616 -
Joined
-
Last visited
-
Days Won
188
Posts posted by shadetree
-
-
On 12/1/2019 at 7:00 PM, superrman77 said:Well I just spent a little time with my 88 350d in the garage today. It has been out of commission for a couple months. It lost spark. It ended up being the ignition coil. I ended up getting an NGK replacement for it. It had a cheap aftermarket pump on it when I bought it. So today while getting it fired back up I noticed this one is on it's way out. So I gonna go ahead and order the oem fuel pump for it. My exhaust had holes in it as well. I put Jb weld on it did ok but noticed today I have a good size exhaust leak so I'm gonna take it off and try to weld it this time around. I have a spare cobra exhaust but it's a little too loud for my liking. My plans are to get the floorboards installed and add a new front bumper with a winch plate. I think I'm gonna install a 2500# winch on it.
put a 3/16 steel plate across the frame tubes right in front of the fan, long x wide enough to allow the winch. I put a warn pro vantage 2500-s ( rope ), roller fairlead. I doubt you will find any new bumpers that fit on it ?. no one makes a winch plate that fits on this model, you must have it custom made/cut.
-
2
-
-
11 hours ago, jeepwm69 said:You find a sending unit Shade?
Looks like this guy won't be using his.
https://www.hondaatvforums.net/threads/replaced-gas-tank-in-my-1987-trx350d.130978/#post-1305476
lol, yeah, found a brand new nos sending unit on ebay, 238.00 shipped..lol. he's a day late, and i'm a dollar short..lol.
-
welcome kool !.
-
welcome !.
-
-
I just want to add, please be very, VERY careful when prying in, and around old seal to get it removed ?, YOU DO NOT WANT TO NICK THE CASE RIGHT THERE , OR IT WILL LEAK EVEN WITH A NEW SEAL IN THERE !. other than this, great instructions !!!!.
-
1
-
-
5 hours ago, TrxPipUK said:How do you go about cleaning the cases?
once the motor is split, gutted, If they are really nasty with mud, grease, baked on red clay so to speak ( which most are ! ), I take a can of '' easy-off '' oven cleaner to them, best thing on the market that I have found that really works !. a little brushing here and there, rinse with water hose, presto, clean cases. but !!!!!!!!!!, it will turn the cases dark gray. soooooooo, I follow up with a buffing on my bench grinder that was a wire wheel on it, then I use a Dremel with a very small wire brush on it to get into the small places the large wire wheel can't reach. pretty simple. I will post a few pics later on today, so you can see how clean the cases turned out :-).
-
1
-
-
2 hours ago, Mac102004 said:How many miles do you have on them though?
couple 100 on the '03, about 500-600 on my '89 trx350d.
-
welcome duck !.
-
1
-
-
12 minutes ago, DuckOfDeath said:I don't have any spare side covers left, but I do have a ton of parts. I was building a 350 for my wife, but today I found a cheap 300 and jumped on it. Now I just want all the spare 350 stuff out of my garage. I'll be spending the weekend stripping down a 87 and 86 to list parts on Ebay. Let me know what you may want.
all I need right now is the right side cover, the atv is pretty much whole. if I need any parts other than the side cover ?, my bud has that covered big time !..lol. been working with him for about 25-26 yrs ?, he's got a gold mine out at his place for me..lol. does not cost me anything cept to work it off, or free !..lol.
-
still cleaning the engine cases, been taking way too long, between this engine, and helping my bud at his place ?, i've been really tired, hours all messed up, I did get a little cleaning done on the cases today, I hope to start putting the lower engine back together soon !.
-
1
-
-
1 minute ago, DuckOfDeath said:Looks great, Shadetree!
ty !, trying to locate a blue right side cover for this '88 trx350d I am restoring.
-
1 hour ago, retro said:I buy cheap general purpose tires. As long as they are a decent name brand, measure true to advertised height, clean out decent in shallow red clay mud and don't puncture easy I'll look at 'em. I ride in all sorts of terrain, some pretty steep and irregular, lots of woods riding where no trails exist, lots of sharp rocks in places and a bit of hard-pack clay/sand/gravel roads. I've tried a few cheap brands over he years, some I hated (Mudlites) some I liked (Dirt Devils). The Mudlites were garbage on my 450 Foreman, stock tires were just as good or better and lasted longer. Since my first experience with Dirt Devils was good those are what I've been shopping for most often. They're cheap!
my mudlite AT's seem to do great on my trx450fm, maybe cuz where I ride ?.
-
28 minutes ago, fatcat said:She’s running!!! I’ll keep everyone posted on my progress.
great too hear !. I should have my butt out in my shop putting this '88 trx350d motor together, just wore out..lol.
-
1 hour ago, fatcat said:Shade, I missed your call. Had to go in a eat supper. We have spark!!!!!!!! It was the darn flywheel. I’ll try to get video of her running shortly. Thanks again for all the help! Pat
good deal !!, we hope to see you come back on here, and say it lives !!!..lol. was a pleasure speaking with ya !.
-
1
-
-
you just haddddddddddd to start a tire thread huh ?..lol. I run mudlite AT's, 6-ply rating, I dont do mud ( least not 4 ft deep ! ), I ride on gravel, sand, dirt, snow, just normal rides, I love them for my style of riding. I wont complain on who runs what , to each their own, I just know what works for me :-).
-
2
-
-
what was the stator reading ??.
-
welcome to the forum.
-
9 hours ago, Fishfiles said:I'd say it is worth what your asking , wait it out ------------ I think if you were to list it on facebook on the market place sites , you would get 100s of calls and or messages , but 85 out of 100 you wouldn't want , as they have a lot of chew'kees on there
feel free to link it there fish, but I wont budge ( much ) on my price !..lol.
-
I got my location set up, was easy.
-
1
-
-
least he didn't say '' look at all these OLD guys !!!! ''..lol.
-
3
-
-
just put my butterball turkey in the oven. i'm like mac, if it dont say microwave on it ?, i'm out of luck !..lol.
-
2
-
-
bout time ya got on here wheels !!, welcome !.
-
1
-
-
1 minute ago, fatcat said:How do you tell which stator is which. I have the 12 pole in it now. Is it stamped on the stator? No China for me. The original owner did that crap!!😂 Thanks again for the call. Pat
I dont remember if they are named stamped or not ?, i'd have to go out to my shop and look at this one I have already out to see if a name is stamped on it ?..lol.
What are your upcoming plans for your HONDA?
in Custom Builds - Restorations
Posted
please start a thread in the utility section, and we'll drop in, give you some pointers :-).