oh400ex 629 Posted September 26, 2020 2 hours ago, Fishfiles said: I had first shot at this jewel yesterday -LOL- I got to ride it and it is fast , we figure in the high 30s , I was a bit scared ----- he wanted $400 , I did offer him $200 and he wouldn't budge off $400 , if the wheels would have matched I might have gone a bit higher , that mudder is loud , which was another down point and the header is scary Build it yourself and it will be more fun! I built one of these and sold it a while back. Go 2-smoke. The 4-stroke kits are crap in my experience. Kits are only about $300 for the really good 80cc ones that have been QC'ed My build was on a bike with shocks and fat tires and was basically a motorcycle. It was awesome! If you have a good bicycle with shock just buy the motor and build one. I regret selling mine... 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted September 26, 2020 1 minute ago, oh400ex said: Build it yourself and it will be more fun! I built one of these and sold it a while back. Go 2-smoke. The 4-stroke kits are crap in my experience. Kits are only about $300 for the really good 80cc ones that have been QC'ed My build was on a bike with shocks and fat tires and was basically a motorcycle. It was awesome! If you have a good bicycle with shock just buy the motor and build one. I regret selling mine... We have a 50+ mile bike trail 3/8 a mile from my house , no motorized vehicles , I use to get by with a E-Zip electric , the controller burned up and only way to fix it would be need everything , that bike might make a good donor bike , very heavy duty and already set up with speedo , lights , racks , etc , etc ---you got me thinking , think I might give up speed and power for less noise and smoke , the 4 stroke is really that bad ? 1 Share this post Link to post Share on other sites
oh400ex 629 Posted September 26, 2020 (edited) 6 minutes ago, Fishfiles said: We have a 50+ mile bike trail 3/8 a mile from my house , no motorized vehicles , I use to get by with a E-Zip electric , the controller burned up and only way to fix it would be need everything , that bike might make a good donor bike , very heavy duty and already set up with speedo , lights , racks , etc , etc ---you got me thinking , think I might give up speed and power for less noise and smoke , the 4 stroke is really that bad ? The two stroke is that much better. When you have such a small engine it makes so much more power it is night and day. This is my limited experience though so grain of salt. Gearing is almost always more important than power on these anyway. Mine was quiet. We put a real muffler on it and it sounded like a really quiet chainsaw. Not bad at all. I love the smell of two smokes so that does not bother me but smoke and smell are going to be there no matter what. Your conversion would be simple if it lines up like a regular bike frame. I had such a good experience with the 80cc two-stroke bike kit that I couldn't recommend anything else Once off the break-in oil they don't smoke too bad either... Edited September 26, 2020 by oh400ex 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted September 26, 2020 I love the smell of 2 stroke oil burning myself , I have had many 2 stroke motorcycles , dirt , trail and street , Kawasaki 500 triple was my favorite , got to love the sound of the ying , ying , ying "" Ka----Wa----Sa----Ki---------- " 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted September 26, 2020 Oh400' ----- What is the brand name of the kit you used , I am very interested in a motorized bicycle build , this is the prospect bike , it is a heavy duty bike Share this post Link to post Share on other sites
oh400ex 629 Posted September 26, 2020 2 minutes ago, Fishfiles said: Oh400' ----- What is the brand name of the kit you used , I am very interested in a motorized bicycle build , this is the prospect bike , it is a heavy duty bike I was searching to find out and can't remember. It was a china motor that someone in the states did some work on and resold after quality control but I can't remember the company... I've never bought from this place personally but have heard really good things - https://www.gasbike.net Sorry I'm not more help but if you can find a local place that might be a good starting point for more info. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted September 26, 2020 $219 with free shipping , it is on the way ------------- the 2 Lithium batteries in the E-Zip were $300 each back when , so $219 is a deal , LOL I was going 4 stroke , then realized I would have had to change the foot crank , so went 2 stroke 1 Share this post Link to post Share on other sites
oh400ex 629 Posted September 26, 2020 (edited) 21 minutes ago, Fishfiles said: $219 with free shipping , it is on the way ------------- the 2 Lithium batteries in the E-Zip were $300 each back when , so $219 is a deal , LOL I was going 4 stroke , then realized I would have had to change the foot crank , so went 2 stroke Awesome! That is going to be a fun one for sure! Don't get all excited and forget to take pictures lol I wanna see the build Edit: That looks like the exact engine that I used BTW. Tons of power We did change the gearing a bit... didn't care about top speed and wanted to do hills and wheelies lol Edited September 26, 2020 by oh400ex 1 Share this post Link to post Share on other sites
oh400ex 629 Posted September 26, 2020 (edited) I also thought that the vibration was noticeable enough for me to want something for it. I used the slip-on foam grips. (Being that you ride in mud... you are probably really familiar lol) These are good but overpriced IMO... a good example of what I'm talking about https://www.amazon.com/Grip-Puppy-Comfort-Grips-Original/dp/B00CP9ADD8 Edited September 26, 2020 by oh400ex 1 Share this post Link to post Share on other sites
TBRider 1,411 Posted October 1, 2020 I'm completely torn on what to say and or think of that on fish, awfully shinny 1 Share this post Link to post Share on other sites
_Wilson_™ 6,593 Posted October 1, 2020 agreed ... something looks odd about that right side door mirror mount ... Share this post Link to post Share on other sites
TBRider 1,411 Posted October 1, 2020 It had to be a wrecked project, the emblems say bronco but I think it has a shorter wheel base, there's alot of work into that..... you can polish a turd and make it shiny. 1 Share this post Link to post Share on other sites
_Wilson_™ 6,593 Posted October 2, 2020 here's a real classic ... tucked in (short rear end axle) one ton dually, I'd like to have this truck. without it being a 4 door. 2 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted October 2, 2020 39 minutes ago, TBRider said: I'm completely torn on what to say and or think of that on fish, awfully shinny looks like a 79 bronco. Roof cut and moved forward over the hood. Looks like the hood don’t open no more. Must have a removable tunnel over the engine like a van. Would guess you would have to lift the body off to work on the engine. Looks like the door might open but you wouldn’t have much room to get in and out. I wouldn’t want it. Fits the topic. What the he!! 1 Share this post Link to post Share on other sites
_Wilson_™ 6,593 Posted October 2, 2020 7 hours ago, TBRider said: It had to be a wrecked project, the emblems say bronco but I think it has a shorter wheel base, there's alot of work into that..... you can polish a turd and make it shiny. if you look just below the passenger side mirror ... looks to be a handle ... i would think the hood is tilt up, or is removable .. 1 Share this post Link to post Share on other sites
TBRider 1,411 Posted October 2, 2020 I doubt mud would ever touch those fenders again unless you roll it over in a hole....lol 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted October 2, 2020 10 minutes ago, Fishfiles said: They fooled me with the drive by claiming it was a 300 , that is actually a Polaris Scrambler 500 ^^^^ Share this post Link to post Share on other sites
Fishfiles 20,147 Posted October 2, 2020 43 minutes ago, TBRider said: I doubt mud would ever touch those fenders again unless you roll it over in a hole....lol How do you get up on it ? You would have to have a assistant with a extension ladder ----- If you were to fall off , wow , you could get hurt bad , got to be 10-12 ft to the seat Share this post Link to post Share on other sites
_Wilson_™ 6,593 Posted October 2, 2020 55 minutes ago, TBRider said: I doubt mud would ever touch those fenders again unless you roll it over in a hole....lol if you rolled that over ... you'd be head to the hospital more then likely... lol .... i reckon that build is what happens when a mechanic looses his mind ?? 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted October 2, 2020 4 minutes ago, _Wilson_™ said: if you rolled that over ... you'd be head to the hospital more then likely... lol .... i reckon that build is what happens when a mechanic looses his mind ?? I wouldn't want to be the mechanic working on it ------ you would need a docking station ---- 1 Share this post Link to post Share on other sites
_Wilson_™ 6,593 Posted October 2, 2020 lol! or sky hooks ... Share this post Link to post Share on other sites
ATC4ever 1,087 Posted October 2, 2020 14 hours ago, _Wilson_™ said: agreed ... something looks odd about that right side door mirror mount ... Big time photoshopped! lol Whered the mirror bracket go too 😛 1 Share this post Link to post Share on other sites