Bossdaddy

Anybody got any more suggestions or are we slowly moving toward a permanent manual shifter ?

It’s a 1

On the vin which number tells the year?

😀

I don’t know of anything.

At present it stays on all the time when switch is on. A little while back it worked right sometimes and sometimes it didn’t come on at all.

I got it, it got two plugs going into it, unplugged both nothing happens when shifting

Please don't tell me that, if that's the problem I'll get heavily intoxicated tonight and I haven't drank a drop in 31 years. Now where is the plug for the fan control unit.

Retro, I’ve had it for today. I’m going in the house and after I rest a little I’m going to start another thread about the oil temperature red light. You have a great Fathers Day and I’ll talk to you hopefully Monday as always any test you come up with send them to me.

I went on and installed the 2001 angle sensor and 2001 ECM on the 2000 and it shifts perfect.

I made the switch and got nothing

I’ll go switch them right now.

I did what you said to do in connectors and nothing happened when pushed buttons.

Tested all 4 did not shift.

Sorry for the delay, I had to step away for a minute. Retro, I need to be sure of what you want, I need a jumper to go from positive battery post to each wire in connector , one wire at a time ? Harness side or switch side?

Performed second test as instructed and got no shift.

OK guys, First test, I unhooked the positive post from the battery cause these jumpers are extremely close then hooked up the jumpers one on r/b to pink and the other went r/b making sure I had nothing touching then hooked the positive lead back. I noticed the green neutral light came on even though the key was off, pushed the shift buttons and nothing happened. Rechecked all connections still nothing.

Guys I have got to shut down, going out of town will be back Saturday, again I appreciate all the help. Go on and send me any test you think we can do and I'll start back Saturday.

Once I removed the gas tank again I realized I had been into that junction before and had cut a lot of the tape back and had inspected it before but went farther on out each line that I could and everything looked new no wear on outer tape looked good.

I have checked all of the wires and connections while I was waiting for your instructions except the big connection where about 5 or 6 come together, heading out to shop now to get that one.

I don't know, I do know we tested that angle sensor and it's wiring forward and backward and established it was good at the time. Then on the last test it sure looks like the wiring on the 2001 may have a problem in that area. I'll go look it over again real good while y'all think.

Thanks Fishfiles for the input, I have looked the harness over the best I can many times but that don't mean crap it could be where I can't see. As long as these guys will try to find the problem I'll hang with them when they scream uncle then I may have to go a different way, Thanks

I'm back with another twist, I put the 2000 angle sensor on the 2001 and tried it with both ECMs got nothing, so just trying to be through I put the 2001 angle sensor on the 2000 and it works fine. He's the twist it also worked when I used the 2001 ECM. Shifted perfect.

Will do, going to take a little while, got to move a bunch of stuff to get started on that. I got 4 machines in shop, bought another one, running out of room.

Yes