Goober 1,555 Posted September 1, 2021 (edited) Hi Jeep thanks very much i sorta like it. yes it bolts to the front bumper and to the front fender mounts. You remove the fender setting bolts and replace them with 3/4 in Heavy plastic spacers. No holes—but the spacers are too short and the carrier was in contact with the fender. so I’m going to try and get it leveled. Edited September 1, 2021 by Goober 3 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted September 3, 2021 @Goober if you happen up anymore nos cmp atv accessories, but sure to post them up! 2 Share this post Link to post Share on other sites
Goober 1,555 Posted September 8, 2021 Talk about hard to find—buy both!😂 1 Share this post Link to post Share on other sites
Goober 1,555 Posted May 30, 2022 Here’s the thread @TexRed kinda the home for rare stuff 1 Share this post Link to post Share on other sites
Goober 1,555 Posted May 30, 2022 On 8/31/2021 at 8:42 PM, Goober said: Just installed the CMP cooler carrier my daughter bought for me for my birthday/Christmas. Didn’t want to drill any holes in the fender. She bought this NIB not a scratch. i don’t know how I’m going to mount my gun—looks like it will stick up too high. Divided on the look—but it matches the rear carrier. @TexRed 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted June 1, 2022 what cmp parts are you looking for @TexRed ? Share this post Link to post Share on other sites
TexRed 4 Posted June 6, 2022 On 6/1/2022 at 12:21 AM, _Wilson_™ said: what cmp parts are you looking for @TexRed ? I ordered the front carrier but it never showed. So now I’m looking for both front and rear again. Share this post Link to post Share on other sites
Goober 1,555 Posted August 28, 2022 On 6/6/2022 at 5:34 PM, TexRed said: I ordered the front carrier but it never showed. So now I’m looking for both front and rear again. Are you still looking @TexRed? Share this post Link to post Share on other sites
Goober 1,555 Posted August 28, 2022 Does this Rancher meter qualify as rare @AKATV?😁 https://www.ebay.com/itm/Honda-OEM-Speedo-Combo-Meter-2000-2005-TRX350FM-Manual-Rancher-4X4-37200-HN5-671-/275428565724?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0 Share this post Link to post Share on other sites
AKATV 822 Posted August 28, 2022 Not really there’s actually quite a few of the old FM meters available because they were only available in the manual shift models as an option and most people didn’t opt at the dealership to have them put on, they weren’t really plug and play because it required an additional kit and wiring harness as well as the speed sensor etc. so most people opted out which left a surplus 1 Share this post Link to post Share on other sites
jeepwm69 7,619 Posted August 28, 2022 9 hours ago, AKATV said: Not really there’s actually quite a few of the old FM meters available because they were only available in the manual shift models as an option and most people didn’t opt at the dealership to have them put on, they weren’t really plug and play because it required an additional kit and wiring harness as well as the speed sensor etc. so most people opted out which left a surplus Do you know if they show gear and speed (like the 500 Foreman) or speed only (like the 450FM)? Share this post Link to post Share on other sites
shadetree 5,884 Posted August 28, 2022 1 hour ago, jeepwm69 said: Do you know if they show gear and speed (like the 500 Foreman) or speed only (like the 450FM)? '01-'98 450's used a speed sensor, no gear position display. then from '02-'04 they just used speed sensors as far as i know. my '03 450fm only has speed on display. Share this post Link to post Share on other sites
AKATV 822 Posted August 28, 2022 12 hours ago, AKATV said: Not really there’s actually quite a few of the old FM meters available because they were only available in the manual shift models as an option and most people didn’t opt at the dealership to have them put on, they weren’t really plug and play because it required an additional kit and wiring harness as well as the speed sensor etc. so most people opted out which left a surplus It showed just the speed It was just the equivalent of the Foreman 450S display for the Rancher, only as an option Share this post Link to post Share on other sites
jeepwm69 7,619 Posted August 28, 2022 4 hours ago, shadetree said: '01-'98 450's used a speed sensor, no gear position display. then from '02-'04 they just used speed sensors as far as i know. my '03 450fm only has speed on display. yeah that’s how my buddy’s 04 is I’m working on. I was curious if the add on meters for the 350 Rancher footshifts only show speed or if they show the gear too. Share this post Link to post Share on other sites
AKATV 822 Posted August 28, 2022 3 minutes ago, jeepwm69 said: yeah that’s how my buddy’s 04 is I’m working on. I was curious if the add on meters for the 350 Rancher footshifts only show speed or if they show the gear too. Just to further clarify, the Rancher 350ES models always came equipped with a meter that showed gear position and speed The non ES Rancher 350 models (FM) did not come with a speedometer, but it was available as an add on option when purchased (or later on if you want to install the kit yourself ) The FM meter only shows speed like the Foreman 450S model The complete kit part number was 37020-HN5-671ZA and its not a simple plug and play meter, as there are a bunch of additional parts needed to make it work The kit has a harness, dash, speedometer mount, speed sensor etc... here is a link showing the kit and parts https://www.babbittsonline.com/oemparts/a/hon/5053dd7bf870021c54bdca6b/meter I have yet to see a Rancher 350FM with a meter "in the wild" 1 Share this post Link to post Share on other sites
jeepwm69 7,619 Posted August 29, 2022 6 hours ago, AKATV said: Just to further clarify, the Rancher 350ES models always came equipped with a meter that showed gear position and speed The non ES Rancher 350 models (FM) did not come with a speedometer, but it was available as an add on option when purchased (or later on if you want to install the kit yourself ) The FM meter only shows speed like the Foreman 450S model The complete kit part number was 37020-HN5-671ZA and its not a simple plug and play meter, as there are a bunch of additional parts needed to make it work The kit has a harness, dash, speedometer mount, speed sensor etc... here is a link showing the kit and parts https://www.babbittsonline.com/oemparts/a/hon/5053dd7bf870021c54bdca6b/meter I have yet to see a Rancher 350FM with a meter "in the wild" I was just curious as I converted my daughters 05 350es to footshIft. The only thing that is “off” is that the gear position showing on the display blinks an error code from foot shifting it. If I swap to an FM wiring harness and meter I’d lose the gear indicator on the dash, so will give up on that idea Share this post Link to post Share on other sites
TexRed 4 Posted August 29, 2022 On 8/27/2022 at 9:57 PM, Goober said: Are you still looking @TexRed? I am still looking. I’ve had to put it on the back burner recently but would snap one up in a heartbeat. Share this post Link to post Share on other sites
bigcountry78 93 Posted February 26 I saw these floorboards on a 450S for sale locally and thought of this thread. Has anyone ever seen a set like this? Maybe Honda made? I got the best pics I could from the marketplace ad. 1 Share this post Link to post Share on other sites
jeepwm69 7,619 Posted February 26 Haven't ever seen any like that. Interesting! 2 Share this post Link to post Share on other sites
bigcountry78 93 Posted February 26 Makes me want to buy it just to have the floorboards lol. Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted February 27 I'll go with yaw too i've never seen a set like that.... nice! And thank you for posting them. Share this post Link to post Share on other sites