shadetree 5,869 Posted July 28, 2020 8 minutes ago, jeepwm69 said: Outta ask more than that Shade. Used ATV prices are up. You can always drop it if it doesn't move. Looks great, as always. i have not listed it yet on CL's, i might put it in at $ 2,300.00- $ 2,500.00 ?, i will wait until i am all done to decide on asking price. i have not test road it yet ?, so i will make my final judgement after i see that everything is working as it should ?. the shift lever seems to not '' feel '' right when i lift up or push down ?, i am hoping the clutch is maybe sticking on disk ?, or it needs adjusting ?, all i know is..is something is not right with it at times when changing gears ?!. Share this post Link to post Share on other sites
shadetree 5,869 Posted July 28, 2020 update: just placed an order for 4 brand new itp mudlite at's, these tires are dry rotted, and some rims need fixing, bit the bullet, bought new tires. thanks goes out to fish for pointing me to bike bandit for the cheapest price !. 2 Share this post Link to post Share on other sites
jeepwm69 7,611 Posted July 28, 2020 They leaking? Look like they have decent tread left on them...... 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted July 28, 2020 4 minutes ago, jeepwm69 said: They leaking? Look like they have decent tread left on them...... Jeep , what you say , Dry rot !!! Is that what that stuff is called , as long as they hold air for the day with no more than 1 bottle of slime in it , send it !!!!! LOL After a good washing , very now and then , I spray my tires down , with a heavy coat of Armor-All or some old school STP Rubber Protectorant which is almost gone , that is good stuff , don't know if you can get it any more , and don't wipe if off , let it soak on , I hate dry rot 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted July 28, 2020 I think I would start that one off at $2,500 at least ---- you seen that guy on the old site wants $500 for one that don't run , engine is locked up , parts missing , fenders all cracked up , tires dry rot Share this post Link to post Share on other sites
shadetree 5,869 Posted July 28, 2020 1 hour ago, Fishfiles said: I think I would start that one off at $2,500 at least ---- you seen that guy on the old site wants $500 for one that don't run , engine is locked up , parts missing , fenders all cracked up , tires dry rot gonna have to start off at $ 2,500.00 now that i had to buy new tires...lol. yeah..that guy is a moron to say the least..550 for a pile of junk...haha..then reported me !..rofl..umm...dude..i'm the only mod here ..helloooo !!!..lol. 2 Share this post Link to post Share on other sites
shadetree 5,869 Posted July 28, 2020 1 hour ago, jeepwm69 said: They leaking? Look like they have decent tread left on them...... yep..they have decent tread on them bro..but the side walls are bad. i had to break them down anyway to fix the dents on the lips of the rims, figured i may as well just buy new tires. if you want these for your project 350's ?. let me know..i'll stash them back, hold them for you next time you head this way, free of charge if you want them ?. no they do not leak. :-). 1 Share this post Link to post Share on other sites
jeepwm69 7,611 Posted July 28, 2020 If they hold air I’ll take them. Used one of the sets of my 350 tires on that Polaris SXS for the little one. Thanks man! 1 Share this post Link to post Share on other sites
shadetree 5,869 Posted July 28, 2020 8 minutes ago, jeepwm69 said: If they hold air I’ll take them. Used one of the sets of my 350 tires on that Polaris SXS for the little one. Thanks man! yep..they hold air, i'll put them back for ya bro. and your welcome !. p.s. they are 24x9x11. 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted July 28, 2020 (edited) sharp as that bike is going to BE completed, ... I'd go with new rubber too. Edited July 28, 2020 by _Wilson_™ 1 Share this post Link to post Share on other sites
shadetree 5,869 Posted July 28, 2020 24 minutes ago, _Wilson_™ said: sharp as that bike is going to BE completed, ... I'd go with new rubber too. really did not have much of a choice ?, rims needed fixing, tires were dry rotted, figured what the heck, time to plant some new tires on her. she's not perfect ?, but dang close !!..lol. 1 Share this post Link to post Share on other sites
shadetree 5,869 Posted July 30, 2020 got the new tires mounted on the rims, new valve stems on the front rims..they were rotted. need to do some more small stuff before i roll it out of my shop so i can start in on a friends 2011 trx420fpe to change out his harness, oil and oil filter change, gonna make about 300 bucks off that project. 1 Share this post Link to post Share on other sites
shadetree 5,869 Posted July 31, 2020 update: got the rims painted, installed, need to adjust the toe-in-out, front wheels are not straight. got the bottom skid plate cleaned and painted, installed. rear hitch installed, but have not painted it yet. was able to crank her up, and check my clutch adjustment, seems to be ok now ?!, shifts a lot better than it was, but i had to turn the adjustment bolt like 2 full turns counter clockwise !..lol. anyway, i will know more when i get it rolled out of the shop, and test ride it. then i will go back over cleaning it up, shiny and all, then take some final pic's, then post it here and on cl's for sale !. 2 Share this post Link to post Share on other sites
shadetree 5,869 Posted July 31, 2020 finale update: here she is all done, i'm not gonna do anything else to her. i will post these pics in the for sale thread. 8 Share this post Link to post Share on other sites
superrman77 68 Posted August 1, 2020 Good job man!!! Share this post Link to post Share on other sites
shadetree 5,869 Posted August 1, 2020 48 minutes ago, superrman77 said: Good job man!!! THANKS !..its listed for sale as of right now. 2 Share this post Link to post Share on other sites
Freedomflyer 1,886 Posted September 5, 2020 He likes to work for free. Share this post Link to post Share on other sites
shadetree 5,869 Posted September 5, 2020 5 hours ago, Freedomflyer said: He likes to work for free. ???. i just gotta ask...where the h---ll did this come from ???. where do you get the idea i work for free ??. i do not work for free ?!..never have..never will !. what i do is, help save members a boat load of cash if they want my help ?. i don't do this kinda work to toss money out the window, i do this to keep me busy, and enjoy the work. this has never...NEVER ..been about getting rich for me, maybe some of us just love wrenching for the heck of it ?..hmmm. yeah..this comment does not sit well with me bro..perhaps i got this way off base ?, but bare in mind..i never work for free...EVER !. 3 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted September 5, 2020 11 hours ago, Freedomflyer said: He likes to work for free. FF. When you were a kid , did you poke ant piles with a stick. 2 Share this post Link to post Share on other sites
Freedomflyer 1,886 Posted September 5, 2020 Sorry shade that was not meant as a slam. Believe it or not it was meant just the Opposite, I meant it that you are way generous and don't think you get paid Enough what you do. You turn out amazing machines when you are done with them and I always feel that you should get more for what you Do. I apologize if you were offended in any way it was not meant that way. 2 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted September 5, 2020 your right, ff.... he doesn't get payed enough .... at least that's my thoughts on it... 1 Share this post Link to post Share on other sites
TBRider 1,407 Posted September 5, 2020 1 hour ago, Fishfiles said: FF. When you were a kid , did you poke ant piles with a stick. I poked a bear once..... 1 2 Share this post Link to post Share on other sites
jeepwm69 7,611 Posted September 8, 2020 LOL. Shade makes projects a lot nicer than I do. If I just figure in part prices I probably do ok on flip bikes. If I figure in anything for labor I'm probably paying myself $3/hour. 1 Share this post Link to post Share on other sites
Goober 1,555 Posted October 15, 2020 (edited) You all raising them Hondas from the dead. Now I’m inspired to go get that Foreman out the mower man’s junkyard. Edited October 15, 2020 by Goober 1 Share this post Link to post Share on other sites