Fishfiles 20,145 Posted March 11, 2023 I just hope you got all the debris out the system from the first hydrostatic failure , cause I have seen it turn into a vicious cycle of repeated failures ---------- might be a good idea to do your filters and screen again and see if anything is floating around Did Hydradyne have anything for you ? Share this post Link to post Share on other sites
shadetree 5,885 Posted March 11, 2023 2 hours ago, Fishfiles said: I just hope you got all the debris out the system from the first hydrostatic failure , cause I have seen it turn into a vicious cycle of repeated failures ---------- might be a good idea to do your filters and screen again and see if anything is floating around Did Hydradyne have anything for you ? i ordered oem kubota parts to rebuild this pump, it should work ?. oh yeah..i flushed the whole system..i removed every line that could come off, ran them through my parts washer, then blew them out with my air compressor .i drained the tractor again, i will pull the pick up filter again, check it. when i go to pick the parts up locally, i will grab another hydro oil filter while i am there. not too worried about a dirty system ?, i just did not replace all the oil seals when i had the chance the first go around ?..big mistake, minor set back..i'll fix it...lol. 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 11, 2023 Didnt have any magnetic check / drain plugs did it ? Some do while some don't .... One of ours (older model) has them, but the newer one doesn't .... And they do work... I never like seeing the effects, although glad those filings are attracted ... And not left for just floating the filter to trap Share this post Link to post Share on other sites
shadetree 5,885 Posted March 11, 2023 18 minutes ago, _Wilson_™ said: Didnt have any magnetic check / drain plugs did it ? Some do while some don't .... One of ours (older model) has them, but the newer one doesn't .... And they do work... I never like seeing the effects, although glad those filings are attracted ... And not left for just floating the filter to trap no, no magnets on this tractor. Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 11, 2023 Figures.... They think just cause some are small tractor it won't be subjected to the use a big one will and it's just the opposite... Matter of fact they see more hard use because they can be are used more because of there size so size in the case matters. Share this post Link to post Share on other sites
shadetree 5,885 Posted March 11, 2023 12 minutes ago, _Wilson_™ said: Figures.... They think just cause some are small tractor it won't be subjected to the use a big one will and it's just the opposite... Matter of fact they see more hard use because they can be are used more because of there size so size in the case matters. i'm pretty sure i got the system flushed out ?..seeing how i got leaks, and adding fluid ?..lol. i picked up another 5 gals of hydro oil, 125 otd...sigh. also picked up my pump parts from this dealer, they called to tell me they came in. can't put the tractor back together until i get that oil seal and plug in ?, they show to be here tuesday ?. oh what fun i'm having !..lol. 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 11, 2023 I can recall Someone saying shade will end being a tractor mechanic..... Before it's said and done... And you doing the part most dred... Transmition work... It's only up from that point.. Lol!... Least you shouldn't have to venture back in there after this.. It's NOT yellow! .... 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 11, 2023 Don't know what is going on here , but it don't look good Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 12, 2023 How you like to be the truck behind this doing 70mph Share this post Link to post Share on other sites
shadetree 5,885 Posted March 12, 2023 2 hours ago, Fishfiles said: How you like to be the truck behind this doing 70mph i'd think by the time i got to the next exit ?..i'd be without a job !..lol. 1 Share this post Link to post Share on other sites
jeepwm69 7,619 Posted March 12, 2023 I need some heavy equipment. Too poor to maintain it, much less buy it, but I need it. Bridges out on Dad’s place. An excavator would be nice to have Notice the supervisor in the 2nd pic 3 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 12, 2023 8 hours ago, Fishfiles said: Haha! Uh huh good luck .... That claas alone could be $50.000 - a cool half milllion ..... Lol! Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 13, 2023 This is different Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 16, 2023 Can I borrow your truck to go to work tomorrow ? 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 16, 2023 This one I'd say is 1960s era , notice the cable and winch to raise and lower the blade --- I worked on a few like this when I was a teenager coming up 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 17, 2023 Don't think this is what it appears to be 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 18, 2023 10 hours ago, Fishfiles said: Don't think this is what it appears to be Found another pic of the beast , built by Buster Peterson , who was a Cat dealer and built many speciality machines thru his life The Side-by-Side D9 Seeking increased material handling, a double-vehicle solution was created placing two dozers next to one another with a shared, long dozer blade. 1 Share this post Link to post Share on other sites
bcsman 1,382 Posted March 22, 2023 For all you backyard 5 acre farmers here's something to help your day go much more quickly...... Here's the story about this tractor from its debut 40 years ago to its resurrection again soon.... https://cowboystatedaily.com/2023/03/20/big-bud-worlds-largest-tractor-at-70000-pounds-is-back-after-40-year-break/ 3 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 22, 2023 Nice! Hm..... Cat drivetrain .... Thats one brand i thought would never come back... I'm kind surprised they didn't go with tracks for lower ground pressure (small foot print) but then again with one this large wouldn't surprise me if tracks were an option.... I'll be keeping up to date on this bad boy... I just hope this partnership last... I'm a bigger fan of cat then johndeere... That's why i was shocked when cat announced they would not be offering power option for over the road trucks in the United States .... That's exactly what happens when the big goof offs in Washington try to regulate things that are better left to the. Experts which the goverment is Not known for.... 1 Share this post Link to post Share on other sites