-
Content Count
848 -
Joined
-
Last visited
-
Days Won
3
Posts posted by Melatv
-
-
Do you have a Peak Voltage Adapter for your meter?
-
Okay that proves the stop switch is good. I will look for more checks
-
Black center one Bl/W wire (with key on)
-
Hi: is the Run switch in the center position ? If so unplug the PCM and check for 12 VCD on the Bl/W wire on the connector. Also have you tried a new spark plug?
-
Hi: Okay -- Check the voltage on the top of the Ign. fuse -- I had to replace a couple of key switches on the 420's lately.
- 1
-
Hi: Check the voltage on the Ign. fuse (10 amp) -- leave the fuse in place -- on the top of the fuse you will see two small gray dots -- test the voltage on each dot with the key on for 12 VDC. Then go to the Ign. coil and test the voltage there on the Bl/R wire with the key on.
-
Hi: Big Welcome Here
-
Hi: Big welcome here
-
Hi: Enjoy your new bike -- have fun -- be safe
- 1
-
-
Hi: Really a nice boat -- have fun -- be safe
-
-
Hi: Big Welcome Here --- get well soon
-
Hi: Big welcome Here
-
Hi Wilson: The one I have is a Laser File-Rite -- only thing I find a problem with is the file is tightened with the thumb screws -- so the file is only being used on one side -- but I just rotate the file and lock the thumbs screws again.
- 2
-
Hi: Big Welcome Here
-
3 hours ago, _Wilson_™ said:I've been doing some digging..... About the grandberg file and joint ..... Any of you fellas delt with one ??
Jeep.... I'd Almost bet money your father has one some place.
Not the best video ..... But it seems to show how very versatile this jig is.... And no need to clamp the bar in a bench / solid mounted vise. @01RUBY500 bet this thing would do a much better job then a grinder.... I know the price isn't bad at all!
Hi Wilson: I have been using that file jig as in the video for over 30 years or more now -- works great.
- 2
-
Hi: Big welcome here
-
Hi: Big Welcome Here
- 1
-
4WD if not used with your Brain -- will just put you farther in the woods when when leaving the road.
- 5
-
On 1/30/2020 at 7:27 PM, riverc said:Maybe will find out when dealer looks at it.
Did you find out anything??
-
Hi: Big Welcome Here
-
Is the breather hose block off?
- 1
-
Hi: Big Welcome Here
Low voltage to fuel pump
in Electronics
Posted
Do you have a Neutral light when trying to start the bike? Is there any codes flashing on the display?