Snow Camo

Welcome to the best Honda atv site around!

What's up guys! I will start by saying I am new to stick welding... 😆 With that said I have been working on an adjustable grab bar. I stopped by a metal supply shop and picked up a couple 90° radius sections of tube. I passed a section labeled hinges. The hinges were pricey so I passed. As i kept walking I found a few bins with scrap metal. In one I found a 1/2" pipe and iirc a 1/2" metal rod. I figured I can use them to make my own hinge. Well that worked out great! So $20 later I went home and put the welder to the metal. Work in progress still, but hey I get to practice stick welding, so that's a bonus. I may just have the same shop Lazer cut the swing armextension bracket as well. I have some more scrap and work to do but hey... Things Always work out for me. Why adjustable? Well first it needed 4 more inches (that's what she said😅), because it should help wheelies with the extended swingarm and loading into the truck. Another thing I made this for while doing wheelies is it will lock into place, but fold up if it hits the ground to prevent frame damage. Anyhoo I need to sort through the adjusting brackets, but what do you guys think? @oldmxrider inspired me to get this one rolling. If I'm correct he is building a 200sx elsewhere?

I may of missed, but have you checked the grounds going to the frame? I believe it is the green and white wire at the cdi that goes to ground. If you have a voltmeter you can check continuity of that wire to ground.

Rock on man. Thanks!

I'll have to find some land to secretly drill and extract crude from. When I do that I'll let you know 😆

With all that's going on we may as well figure a way to run our quads off water for fuel 😆

Looks like what I would use to aid in removing stripped screws🤔

Welcome to the best quad site on earth! You did not mention if you replaced the ignition switch. You can either pull it apart and clean the contacts or just bypass the two wires that make contact. That was the reason my trx200sx did not have spark. Easy fix.

Hey Jeep, do you know any brands that have grease zerks? I came across skyjack, but the bolt hole was too large.

Your most welcome Jay I have heard of using a uv light to cure clear coats. I also hear it will reverse the yellowing in white plastics as well. Idk I never tried it to know. I do not plan to take this one off the street, but as you said a couple coats later and it will be new again. I'm totally fine with that for now. Spray paint is not expensive and it gives me time to finalize colors. One day when it all comes together and it is complete I will sit back and reflect on what goes off to powdercoat and which colors. I may change a color here and there... Powder coat is one of those bring more get a better deal things. At least out here it is. Those darn condems... always breaking lol. They seem to never last! Lol

The plexiglass cover should be here any day now. I have been thinking I will need to wait to drill the bolt holes due to not having rear tires. The machine needs to be resting on it own or the picture may not sit straight after it is. I'll secure it with a couple dabs of silicon for now.

Thanks guys!

Anyone know any? The pic is generic in the listing.

That's the reason I cleaned the wheels up. The factory clear turned yellow and peeled. So far this stuff has held up great for my other projects, so I guess we'll see how it does long term I love raw metal and wood or atleast being able to see the texture/ grain.

Here is what I used

I believe there is just the regular and semi gloss. The instructions do say to not use with rubber, so that is out. I think I'll apply another coat or two and see how much more gloss I can get out of the wheels. It would not hurt anything.

Welcome!

I used the last of my red and gold last night. Spent yesterday masking and coming up with ideas. When I have the jug and head worked I plan to paint the fins gold and valve cover red. Alternating colors with the bolts. Pic of the business side.

I have a cloth buffing wheel for my drill It works great I just did not have the time to spend buffing the imperfections. I really do need to get a orbital buffer for other projects I need to clean up. I have been saying I'll get one for what seems like 10 years lol. I keep saying I can not justify the cost of a good buffer so I Mr. Miagi it hahaha. Wax on... Wax off... 🤣 You used to ride bulls? Wow!

nice color scheme! All my parts have been taken off and sprayed, so no worries there. I considered powdercoat, but if I did $600+ would be spent on color alone. That's alot of parts to be bought lol. I had to weigh my options. Man you are right about the filter. That was the very first thing I checked when I got this quad. I split the cases and tried to find the oil filter screen listed in the manual... NOPE none to be found idk, but it all looked clean inside. I guess Honda skipped that part. I should of checked the clutch pack while in there. I had hoped this one would be one of a kind and motivate viewers to make their own or fix up their atv. It all starts with finding motivation and coming up with ideas. Never be afraid to fail. See a positive outcome and it will all come together nicely 😀.

I will have to pickup some of that polish for future use. That's right up my alley. I like a good mirror reflection on metal. I still have one wheel to prep and paint. Also I plan to prep, mask and paint the backside of the wheel in the pick. I have run out of paint and need to get more. Maybe this upcoming week I will get some more red, black and gold to spray. I still need to get the compression tester. I have been mulling over getting that bit of news or not lol.

The manufacture did not list the refresh rate unfortunately. Yes that clear coat is awesome. I bought it straight from the manufacture. They sell to the public and have great email support. I remember that polish. I did not try it due to the pitting in the aluminum surface. A shine makes the pitting stand out like a sore thumb. Hey thanks for the kind words. I had hoped it would come together as it has. Still more spray to come. I'll carry this red, gold and black theme over to the plastics down the line. I'll have to figure some graphics for this quad.

Your most welcome Hooks

Welcome😁

Welcome to this awesome site!