Jemmons467 179 Posted January 12, 2021 I am wondering what diy modifications people have done to or are still doing to their Hondas. Lights, racks, bumpers, storage, wheels from this for that, lifts, something for a different machine you fit on yours, thing of that nature. Any Honda is fine, I have a 2000 Foreman 450 ES and so far replaced the front lights with the led lights that go in truck bumpers. 2 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted January 12, 2021 good thread! 424 kickout on a 2000 300, I've got a lift kit install planned when warmer weather gets here plasti-dip (bright aluminum) wheels, ram mount steering stem headlight /spotlight which is removable, magnetic dimple crankcase plug, i added a hondaline cooling (not standard on 300's made in the states) , cmp front bumper, brake light install, honda 300 bark busters (hand gaurds) speedo kit, and other mods.... I'm sure i over looked. and the project keeps going! 3 Share this post Link to post Share on other sites
retro 4,071 Posted January 12, 2021 Oh my, wait'll you see some of the mods that @Fishfiles, @jeepwm69, @Mac102004and a few others have done! 🙂 My mods are pretty tame compared to most others. My '00 350 Rancher ES is mostly stock. I have Jeeps start in any gear mod, his Rancher 400AT 2x4x4 selectable front diff swap, @wheelsquad & I's programmable fan control gizmo and I'm working on a 420 Rancher front disc brakes swap this winter. 5 Share this post Link to post Share on other sites
Jemmons467 179 Posted January 12, 2021 I want to buy a 424 kickoff for mine, I hear good things. Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted January 12, 2021 it made all the defrence on mine when i installed it! less ware on the front end, just out right more fun to ride, fish has to be the king at mods, lol. 3 Share this post Link to post Share on other sites
Jemmons467 179 Posted January 12, 2021 (edited) @retro what do you get out of the programmable fan gizmo? I enjoy doing diy mods to things I own. When I was tuning VWs I was one of the firsts to use a heineken mini keg for an intake Edited January 12, 2021 by Jemmons467 1 Share this post Link to post Share on other sites
retro 4,071 Posted January 12, 2021 The FCU gizmo reliably controls the cooling fan on any air-cooled Honda ATV. This is our current gizmo thread here: I have only gotten partially through this last build cause I became too busy to complete it, but I am restarting this project from scratch in a few days. I found some fahrenheit modules & looking forward to get back at it! 2 Share this post Link to post Share on other sites
Jemmons467 179 Posted January 12, 2021 22 minutes ago, retro said: The FCU gizmo reliably controls the cooling fan on any air-cooled Honda ATV. This is our current gizmo thread here: I have only gotten partially through this last build cause I became too busy to complete it, but I am restarting this project from scratch in a few days. I found some fahrenheit modules & looking forward to get back at it! I wanted to look into a way to have the engine temp displayed. I'll dig through the post. Share this post Link to post Share on other sites
retro 4,071 Posted January 12, 2021 50 minutes ago, Jemmons467 said: I wanted to look into a way to have the engine temp displayed. I'll dig through the post. The FCU gizmo displays oil temp in realtime. If you need to monitor cylinder head temp I think you can do that too with a similar high temp module. I'll look it up... Share this post Link to post Share on other sites
Fishfiles 20,147 Posted January 12, 2021 2000 TRX450S 500 jug and custom piston 400 head HMF muffler Dyna-Jet carb kit snorkel 424 kick out double relocated oil cooler double fans extended swing arm 6 led lights , 7 inch head light lift winch 1000 w 4 speaker sound system wheel spacers 29.5 Outlaws disc conversion front and rear hydraulic brake conversion rear floor boards stick stoppers EBC clutch kit 34.5% reduction reverse lock out by-pass suicide hand shifter dual batteries Garmin Montana quick snap mount drink holder machette holder receiver hitch ( not shown in this pic) 5 Share this post Link to post Share on other sites
Jemmons467 179 Posted January 12, 2021 10 hours ago, retro said: The FCU gizmo displays oil temp in realtime. If you need to monitor cylinder head temp I think you can do that too with a similar high temp module. I'll look it up... Thank you, I haven't put mush research into it yet but I do plow with it and my fan does kick on so I would like to know the temp I am running, either engine or oil. @Fishfiles thats a legit looking Foreman you've got. 1 Share this post Link to post Share on other sites
jeepwm69 7,719 Posted January 12, 2021 14 hours ago, Jemmons467 said: I am wondering what diy modifications people have done to or are still doing to their Hondas. Lights, racks, bumpers, storage, wheels from this for that, lifts, something for a different machine you fit on yours, thing of that nature. Any Honda is fine, I have a 2000 Foreman 450 ES and so far replaced the front lights with the led lights that go in truck bumpers. First thing that comes to mind is disc brakes up front 05-11 Foreman, 05-14 Rubicon, and 06-current Rincon knuckles, hubs, and rotors will bolt right on the ball joints giving you disc brakes using factory parts. 2 Share this post Link to post Share on other sites
Jemmons467 179 Posted January 13, 2021 If anyone has a long driveway or road and has to take your garbage cans to the end of it you need this. 3 Share this post Link to post Share on other sites
freebo86 291 Posted January 13, 2021 (edited) Nice thread! Gives us newbies something to see and get inspired by! Edited January 13, 2021 by freebo86 3 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted January 13, 2021 Jemmons 467 , you take that garbage can hitch to the next level , and you can switch to a drop down or raise up trailer hitch or hook with the pull of a pin , weld a 1 1/4 inch receiver tube to the tongue of the hitch 2 Share this post Link to post Share on other sites
slowindown 494 Posted January 13, 2021 The pics and linked thread is a shackle mount I made for giving an easy place on the front to hook to when using a snatch block, etc.: 1 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted January 13, 2021 Here are a few more DIY mods : 1992 TRX300FW Southern Blue nicknamed ( Soc Ra Blue = Blue Balls ) 86 BigRed cam , chain and sprocket 88 exhaust pipe , High Performance muffler ported head , Wiseco 10.5/1 piston EBC clutch kit , 54% reduction Warn 424 1st gen kick out SuperATV disc brake conversion front , 250 Fourtrax master cylinder wheel spacers , 2" rear 1" front stick stoppers 2 cone shims added to front diff for traction hub paddles and longer wheel studs aluminum slots , 27 Outlaws floor boards , snorkeled 5 led lights = two rear , two front , one bar hand and foot shifter ( after video ) 3 inch swing arm stretch , rear brake delete rear 420 1st gen front shocks , 2 inch lift rear reverse lock out by-pass 250 Fourtrax front brake lever with adjustable cable end K+N air filter front and rear diff , transfer case all drilled , tap and run grease oil cooler in stock/option location 1000 watt 4 speaker sound , custom speaker mounts , water proof amp box Imitation Yeti with stainless turn bucket hold downs drink holder Super Winch , KFI solenoid dry box , machette holder Garmin GPS mount rear view mirror to monitor tail gaters LOL 4 Share this post Link to post Share on other sites
freebo86 291 Posted January 13, 2021 11 minutes ago, slowindown said: The pics and linked thread is a shackle mount I made for giving an easy place on the front to hook to when using a snatch block, etc.: How do you keep that front skid plate (aluminum) so straight and not mangled? Mine looks like !. Share this post Link to post Share on other sites
slowindown 494 Posted January 13, 2021 (edited) 6 minutes ago, freebo86 said: How do you keep that front skid plate (aluminum) so straight and not mangled? Mine looks like !. Actually, its plastic on the 05+ foremans. I try not to bash stuff with it and that machine only has maybe 800 miles on it. The one on my 02 rancher (steel), otoh, I took off and beat the dents out many times. Edited January 13, 2021 by slowindown 1 Share this post Link to post Share on other sites
freebo86 291 Posted January 13, 2021 39 minutes ago, slowindown said: Actually, its plastic on the 05+ foremans. I try not to bash stuff with it and that machine only has maybe 800 miles on it. The one on my 02 rancher (steel), otoh, I took off and beat the dents out many times. perhaps something of stronger built is needed. I’m sure someone is gonna chime in with theirs that’s made out of 1/2” steel 🙂 1 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted January 14, 2021 6 hours ago, freebo86 said: How do you keep that front skid plate (aluminum) so straight and not mangled? Mine looks like !. with those aluminum plates, that's almost impossible to keep them from getting bashed up. i knew it was a mistake when they came out with those. a half inch steal plate would sure hold up, freebo, lol! if you looking for a perm deal, the yep a 1/8 inch steal plate bolted on, you could even dress up with stainless steal, aluminum checker plate. kind of like fish did here, credit for the pic goes to @Fishfiles 1 Share this post Link to post Share on other sites
Jemmons467 179 Posted January 16, 2021 What does everyone like to use for rear storage? I was thinking about buying a heavy duty storage tote like the Plano Sportsman tote. Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted January 16, 2021 i use military ammo boxes myself ... but mostly all i carry is chainsaw files spare chains, a few hand tools etc, just for cutting wood. what were planning on hauling ? longer items i just strap to the rack. never was a fan of having too much weight on the rear rack. Share this post Link to post Share on other sites
Wheeler 2,527 Posted January 16, 2021 I have a slim black plastic storage box that was designed for a front rack. This year I may remove it & see If I can get a back seat for my wife.. I love ammo boxes, one on each side with a cooler in middle. I've seen that lots! 2 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted January 19, 2021 On January 13, 2021 at 2:24 PM, freebo86 said: How do you keep that front skid plate (aluminum) so straight and not mangled? Mine looks like !. going back a tad on the tread, here's kind of the same setup i did (older pic) as fish had, as a matter of fact, fishs mod is where i got this idea from, but after i stalled the cmp bumper (changed the high due to the lights) i took the plate off the project 300, might add it to the 97. 2 Share this post Link to post Share on other sites