IanF 10 Posted June 27, 2021 Folks, Kind of like Christmas, on Wednesday I get to collect a couple TRX350D - both are in pieces, so a full restore and assembly required. I have played on various other old quads, but will be sure to come back and beg advice if I encounter problems. All going well, there will need to be a decision regarding my 'keeper' atv...........Kawasaki KLF400......or a Honda Foreman! 😀 Ian 3 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted June 27, 2021 Welcome Ian , have a cousin named Ian , and ride a Honda , we practically brothers from anther Mother !!! 1 Share this post Link to post Share on other sites
IanF 10 Posted June 27, 2021 Just now, Fishfiles said: Welcome Ian , have a cousin named Ian , and ride a Honda , we practically brothers from anther Mother !!! Noooo! Is he also incredibly good looking, sophisticated and charming, immensely practical - yet strangely modest? 😃 What are the chances? 1 6 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted June 27, 2021 4 minutes ago, IanF said: Noooo! Is he also incredibly good looking, sophisticated and charming, immensely practical - yet strangely modest? 😃 What are the chances? He is a movie actor and stared in quite a few series and movies !! 1 Share this post Link to post Share on other sites
Wheeler 2,527 Posted June 27, 2021 Welcome to the site! 1 Share this post Link to post Share on other sites
retro 4,071 Posted June 27, 2021 Welcome to ATVHonda Ian! 1 Share this post Link to post Share on other sites
bcsman 1,404 Posted June 28, 2021 Hey Ian glad you found us. There are a number of 350D riders around here so not like nobody will know about them. If @shadetree shows up around here he has one and entirely tore it down and rebuilt. He has also done a few others along with a ton of the older Hondas. There shade did I earn my monthly dividend......lol 2 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted June 28, 2021 welcome to ATVH, lan. 1 Share this post Link to post Share on other sites
jeepwm69 7,719 Posted June 28, 2021 Welcome aboard 1 Share this post Link to post Share on other sites
Goober 1,555 Posted June 29, 2021 (edited) Welcome! Shadetree has restored countless of Hondas including many of these models. He and other members have lent their expertise to restorations by others, including me. Hopefully and with the atvhonda crewe, you’ll bring back both of these quads. Just be patient and don’t break anything! You may need three or four more donor machines! spray every bolt and screw head with penetrating oil. Several times. Buy a bit driver and a few cross point bits—an old screwdriver will strip the screws heads. make sure to use 6 point sockets on bolt heads. Get a 1/4” and 3/8” breaker bar to GRADUALLY detorque those old bolts. You’ll ruin your ratchet handles and some bolts using a ratchet handle to detorque. only buy OEM parts. Download the service manual from this site Edited June 29, 2021 by Goober 3 Share this post Link to post Share on other sites
shadetree 5,969 Posted June 29, 2021 On 6/27/2021 at 7:13 PM, bcsman said: Hey Ian glad you found us. There are a number of 350D riders around here so not like nobody will know about them. If @shadetree shows up around here he has one and entirely tore it down and rebuilt. He has also done a few others along with a ton of the older Hondas. There shade did I earn my monthly dividend......lol ummm..i did not see 20 bucks in paypal ?..sooo..no..you failed..lol. 2 Share this post Link to post Share on other sites
shadetree 5,969 Posted June 29, 2021 welcome to the forums Ian !. 1 Share this post Link to post Share on other sites
shadetree 5,969 Posted June 29, 2021 2 hours ago, Goober said: Welcome! Shadetree has restored countless of Hondas including many of these models. He and other members have lent their expertise to restorations by others, including me. Hopefully and with the atvhonda crewe, you’ll bring back both of these quads. Just be patient and don’t break anything! You may need three or four more donor machines! spray every bolt and screw head with penetrating oil. Several times. Buy a bit driver and a few cross point bits—an old screwdriver will strip the screws heads. make sure to use 6 point sockets on bolt heads. Get a 1/4” and 3/8” breaker bar to GRADUALLY detorque those old bolts. You’ll ruin your ratchet handles and some bolts using a ratchet handle to detorque. only buy OEM parts. Download the service manual from this site i can tell you right now, buying oem parts for these old girls is unheard of right now !. honda has done away with the oem c.d.i.'s even for my '89 trx350D !. 2 Share this post Link to post Share on other sites
masterblaster126 17 Posted June 29, 2021 Welcome Ian 1 Share this post Link to post Share on other sites