TBRider 1,407 Posted March 8, 2021 2 minutes ago, _Wilson_™ said: there is also a single prop airplane .... that flys the same route as the pipe line runs, all the way to the sub / pump station in culleoka just a few miles from my home, which i never have asked about, i take it, it's messuring or scanning the pipe line, i do get letters from the company with an emergency number to call, which i hope i never have to use.... lol Yea, a 48" natural gas pipeline that is 50 miles long gives off quite a bang. They have to have Emergency Shut Downs now in the lines.it took them 12 hrs to bleed down the pressure on the pipeline before we could cut it open to replace it. The yellow one in the pic was running at about 700 psi when I was sandblasting it. They knocked the pressure down for me to work on it.....lol 2 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 8, 2021 hm pipe line tech, dish tv tech, your a man of many skills! bet you would have had no issue installing new pex water lines from my HVAC to the furness ? you need to move down here with wheeler! lol! 1 Share this post Link to post Share on other sites
TBRider 1,407 Posted March 8, 2021 I need to build this now... 2 3 Share this post Link to post Share on other sites
jeepwm69 7,627 Posted March 9, 2021 Nice. Someone on their phone while driving I presume..... 1 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 9, 2021 lol! if it was, that was one expensive call. Share this post Link to post Share on other sites
retro 4,049 Posted March 9, 2021 I can't believe that overpass didn't get shifted on the footing a bit. It looks like the support beam got bent is all. 1 Share this post Link to post Share on other sites
Freedomflyer 1,886 Posted March 9, 2021 Ouch!!!!! 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 9, 2021 hard to explain how the last beam of the bridge was struck, (south side, when the road is a north bound) it had to be on a low boy, or drop deck, the driver should have dumped the air bags to lower the load, IF, the rig had that suspension system. Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 9, 2021 He had to hit that bridge at 75 mph to cause that much damage , notice the under carriage to gone , it snapped off the slew bearing 1 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 9, 2021 Team Polaris 1 5 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 9, 2021 6 hours ago, Fishfiles said: He had to hit that bridge at 75 mph to cause that much damage , notice the under carriage to gone , it snapped off the slew bearing hm, slew bearing, here they call those turn table bearings, but yeah he has to be moving on, now, most likely to being un employed. Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 9, 2021 58 minutes ago, _Wilson_™ said: hm, slew bearing, here they call those turn table bearings, but yeah he has to be moving on, now, most likely to being un employed. Different manufacturers have different names for the same part , Rotek is the main supplier of swing bearings , so some call them a Rotek bearing also called turntable bearing , slew bearing , rotary bearing Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 10, 2021 ah, thanks, I've heard them called swing bearings to. Share this post Link to post Share on other sites
Tim-ANC 202 Posted March 10, 2021 (edited) Can never get enough fracking Edit: a couple pages back when I saw the fracking post Edited March 10, 2021 by Tim-ANC Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 10, 2021 @TBRider thoughts on this setup ? a few changes i would have made, one, I'd have parked it closer to the structure , that way if the hoist did fail, I'd land on a roof and not drop all the way to the ground. 1 Share this post Link to post Share on other sites
TBRider 1,407 Posted March 10, 2021 I'd do it, that lift can handle the weight....lol 3 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 10, 2021 (edited) why does your answer not shock me.... lol, yeah you need to move down south! your okay in my book, just a tad on the crazy side, always works (thumbs up) what about this setup ? i think @Freedomflyer would pass, i sure know i would. Edited March 10, 2021 by _Wilson_™ 2 Share this post Link to post Share on other sites
Fishfiles 20,145 Posted March 10, 2021 this is a face book video , so everyone might not be able to see it , but it is the most awesome motor cross jump I ever seen to take the lead https://www.facebook.com/titansofdirt/videos/836338839860303 1 Share this post Link to post Share on other sites
Freedomflyer 1,886 Posted March 11, 2021 Yes I would!!! 1 Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 11, 2021 10 hours ago, Freedomflyer said: Yes I would!!! lol, makes my hand hurt just looking at that sketchy setup. this has to be just as bad.... these guys must be hard up for money, or getting payed very well. Share this post Link to post Share on other sites
_Wilson_™ 6,567 Posted March 11, 2021 and this ... wth was this guy thinking ? a running chainsaw combined with a chance to fall, and no chaps ? Share this post Link to post Share on other sites